Check Apex Programming - Kalk Stirrer powered by a Neptune PMUP connected via 1LINK

[b_d_e91]

Hi All,

I thought I had this figured out but the current coding doesn't seem to be consistently working. The current hardware set up is the following:

RO Container with PMUP connected to the EnergyBar -> (Water Flow) -> Kalk Stirrer -> (Water Flow) -> Sump

The conditionals to run the PMUP are based upon the current pH reading from the Apex pH Probe and whether or not there is sufficient empty water capacity in the sump monitored by an Optic.

Configuration:
1. Fallback OFF
2. Set OFF
3. IF SumpWL CLOSED Then OFF
4. IF pH < 8.10 Then ON
5. IF PH > 8.40 Then OFF
6. When On > 000:15 Then OFF

Thanks for the help!

 

[blaxsun]

Would it work to use "Defer 000:15 Then OFF"? instead of the last line?

 

[b_d_e91]

Ok, thanks. I’ll try that!