ClearView Aquarium Lids Master Thread - It all started RIGHT HERE!!!

[ClearView Lids Verified Sponsor]

How does the lid work with a corner overflow on a deep blue 80 pro rimless? Im ready to buy one.

The DB tanks have a recessed overflow box that sits at least 1/4" below top glass edge. Therefore, in almost all cases here we go OVER the overflow. Note that all lids are custom built to order so if you would like YOUR lid to go AROUND the overflow instead you can specify this at the time of order.

 

[aaron23]

You have PM

 

[Chelle's Ocean]

Looking for:
Any photos of lid for... a 180g dual overflow ? Would like to see the overflow area, the 3 openings, know the ease of feeding/maintenance , etc..how you like it/dislike something . ..

Thank you

 

[ClearView Lids Verified Sponsor]

Looking for:
Any photos of lid for... a 180g dual overflow ? Would like to see the overflow area, the 3 openings, know the ease of feeding/maintenance , etc..how you like it/dislike something . ..

Thank you

Hi , we have lids for this size tank and everything in between and bigger. There are a number of pictures people have posted within this thread that may give you what you are looking for.

How the overflow area is handled will vary based on the tank's construction. If the overflows sit at least a 1/4" below the top edge of the glass then we have the option of going OVER or AROUND them. Some have them covered in solid material for noise attenuation as well.

We strongly recommend at least one feed door (multiples can be ordered after initial checkout) for a lid this size. The lid will only weight around 10lbs likely, but longer/larger lids are naturally a bit more clumsy to remove on a regular basis. The feed doors are 3x5 in size so do provide a nice space for spot feeding and minor maintenance in the tank without lid removal. More doors, more convenience

Let us know if you have any other questions.

 

[aaron23]

please reply to my message, thank you

 

[ClearView Lids Verified Sponsor]

please reply to my message, thank you

Thanks for being a repeat customer aaron. You were also among the very first adopters of our ClearView Lids for another tank of yours.

We are however just a smidge slammed in comparison to back then, so you gotta give us more than a couple hours to reply to PM's before pinging the main thread for response please. Also, all information/changes/sketches related to your new order should be sent in reply to your Order Confirmation Email. This helps us greatly in keeping the administrative side of this whole process as efficient and organized as possible.

We look forward to making your second ClearView Lid! Thanks.

 

[tautog83]

Yea was wondering same as my locline comes out above the water line a couple inches before the overflow . I know you guys can work around it but I feel like that would look weird. I would need it to be totally closed too because of wrasses

 

[Chelle's Ocean]

Hi , we have lids for this size tank and everything in between and bigger. There are a number of pictures people have posted within this thread that may give you what you are looking for.

How the overflow area is handled will vary based on the tank's construction. If the overflows sit at least a 1/4" below the top edge of the glass then we have the option of going OVER or AROUND them. Some have them covered in solid material for noise attenuation as well.

We strongly recommend at least one feed door (multiples can be ordered after initial checkout) for a lid this size. The lid will only weight around 10lbs likely, but longer/larger lids are naturally a bit more clumsy to remove on a regular basis. The feed doors are 3x5 in size so do provide a nice space for spot feeding and minor maintenance in the tank without lid removal. More doors, more convenience

Let us know if you have any other questions.

Not sure who is typing above, or whom I have been messaging back n forth today, but thank you for the reply.. I will continue to look for the photos I am curious of, and get my specs to you shortly to see if its something you can work with.. thank you! and Happy Thanksgiving to everyone

 

[ShinerMaginer]

Can you ship to Canada? I have a 200DD, looking for a quote.

 

[ClearView Lids Verified Sponsor]

Can you ship to Canada? I have a 200DD, looking for a quote.

Sure can, we ship to Canada all the time. Shipping charges autocalculate on our website.
Thanks!

 

[Marktheshark83]

Just wanted to make sure you are still taking orders and about how long it would take. Looking for one for my 30g jbj rimless

 

[ClearView Lids Verified Sponsor]

Just wanted to make sure you are still taking orders and about how long it would take. Looking for one for my 30g jbj rimless

We sure are! Response has been overwhelming - we are currently shipping at 6 weeks.
Thanks!

 

[aaron23]

i sent a follow up email with lid specifications can you just lmk that you received it with my order #, thank you

 

[ClearView Lids Verified Sponsor]

Received, thanks Aaron.

 

[Ortho281]

I just placed an order online for my 65 gallon rimless. Looking forward to receiving mine!

 

[pugcrush]

Are powercords considered cutouts? Looking to get one for a reefer 170. Any costs to that? Thank you.

 

[ClearView Lids Verified Sponsor]

I just placed an order online for my 65 gallon rimless. Looking forward to receiving mine!

Thank you for your order!!

Are powercords considered cutouts? Looking to get one for a reefer 170. Any costs to that? Thank you.

They are cutouts, they are included in the base price (full customization).
Thanks!

 

[pugcrush]

They are cutouts, they are included in the base price (full customization).
Thanks!

Thanks for the quick reply! I'll be placing an order in a bit

 

[ClearView Lids Verified Sponsor]

Thanks for the quick reply! I'll be placing an order in a bit

Thank you for your order!

 

[certain_code]

Finally bit the bullet and placed my order. Assuming a higher than normal order amount given the sale, are you still expecting a 6 week lead time? Cannot wait to have a proper cover on my Deep Blue rimless.