Co2 degasser pump to di canisters

[Webbinator]

Been burning up di resin very quickly on a new RODI unit. I've already used up well over 3/4 of the resin in the first canister after making only about 60 gallons of 0 TDS water. I'm on well water and after doing some research I'm finding it's very likely due to having high co2 levels. Looking to set up a way to gas off the co2 using an air stone in a reservoir of ro water then pump that water through my di canisters. I've got a spare booster pump that puts out Just shy of 50 psi. I did a test run using that pump to send the water through my BRS dual di canisters and it was really moving it through at a good pace. Will it hurt anything pushing the water through the di resin at that pressure or should I find something a little less powerful? Thanks for any advice on this.