Coppersafe reading

[kevsqn]

does these look 2.0?
They are from 2 different tanks

 

[Brew12]

I would say so. I tend to calculate copper dosage because these kits are so hard to read. But yes, this is very close to what I call 2ppm.

 

[kevsqn]

I would say so. I tend to calculate copper dosage because these kits are so hard to read. But yes, this is very close to what I call 2ppm.

Ive tried dosing with 1.3mL/gallon at first. And it really didnt give me reading of 2.0. So i just keep dosing and testing every couple days and see if i would get 2.0.

I would say im maybe even at 2.3mL/gallon now and im not even sure on that. It very well could be higher. And as you said it reads 2.0 They seem to be doing fine and eating alot.

 

[Brew12]

Ive tried dosing with 1.3mL/gallon at first. And it really didnt give me reading of 2.0. So i just keep dosing and testing every couple days and see if i would get 2.0.

I would say im maybe even at 2.3mL/gallon now and im not even sure on that. It very well could be higher. And as you said it reads 2.0 They seem to be doing fine and eating alot.

IF the Fritz information is accurate (a much bigger if than it should be) you would need to dose 2.1mL/gal to get 2ppm copper.

 

[melypr1985]

Looks like it to me as well. The second may be a bit under 2.0