Coppersafe sucks

[Kzang]

I finally got my high range Hanna checked in and my copper was 2.5. Reports on the main copper safe dosage thread, I followed that. Everything is doing okay, tangs and wrassss. I added 4g and got it down to 2.2. I think I'll leave it there for now.

Blue tang still showing ich after a few days of tat high of copper. Crazy.

I should of went with copper power.

 

[Old Fritz]

You do realize you have to wait for the ich to go through its life cycle before it kills the ich. It only kills it in the free floating stage.

 

[Flippers4pups]

You do realize you have to wait for the ich to go through its life cycle before it kills the ich. It only kills it in the free floating stage.

This^.

 

[Kzang]

You do realize you have to wait for the ich to go through its life cycle before it kills the ich. It only kills it in the free floating stage.

Yes. It already dropped off and reattached in above 1.5 of copper

 

[Flippers4pups]

I finally got my high range Hanna checked in and my copper was 2.5. Reports on the main copper safe dosage thread, I followed that. Everything is doing okay, tangs and wrassss. I added 4g and got it down to 2.2. I think I'll leave it there for now.

Blue tang still showing ich after a few days of tat high of copper. Crazy.

I should of went with copper power.

Don't know if you've seen this yet:

Fish and Treatment Guidelines (with chart)

Fish and Treatment Guidelines (with chart) The following chart is a quick reference guide on what QT protocol should be used according to which type of fish you are running through QT. It will give you an idea of which methods are generally safest with certain species but is not meant to be...

www.reef2reef.com

 

[lapin]

^^^ This is why I do TTM

 

[Kzang]

^^^ This is why I do TTM

I did ttm, and it got through

 

[Kzang]

Don't know if you've seen this yet:

Fish and Treatment Guidelines (with chart)

Fish and Treatment Guidelines (with chart) The following chart is a quick reference guide on what QT protocol should be used according to which type of fish you are running through QT. It will give you an idea of which methods are generally safest with certain species but is not meant to be...

www.reef2reef.com

I'm more of complaining that the concentration of coppersafe isn't consistent

 

[Flippers4pups]

I'm more of complaining that the concentration of coppersafe isn't consistent

Got it. Sometimes it take a couple doses to it work. Some strains of ich are hard to kill. I posted the thread on copper if you weren't aware, was still QTing wrasses and planning on using copper power.

Like @lapin said, TTM is a option.

I hope it works out for you! Best of luck!

 

[Kzang]

Got it. Sometimes it take a couple doses to it work. Some strains of ich are hard to kill. I posted the thread on copper if you weren't aware, was still QTing wrasses and planning on using copper power.

Like @lapin said, TTM is a option.

I hope it works out for you! Best of luck!

I did ttm, and it got through or was present in my system. It's why I'm going fallow in DT and doing copper

 

[Flippers4pups]

I did ttm, and it got through or was present in my system. It's why I'm going fallow in DT and doing copper

You could do TTM again and after keep them in observation till fallow period is complete.

 

[Kzang]

You could do TTM again and after keep them in observation till fallow period is complete.

I'm out of a heater. I got 4 tanks going lol. DT, nem tank, copper tank, and cycling 40g breeder for the 7 fish in copper qt for fallow period