Cracked acrylic aquarium. Do I need to fix, replace or do nothing?

Ali shah

New Member
View Badges
Joined
Jul 7, 2023
Messages
2
Reaction score
2
Location
Usa
What state or country do you live in
California
Rating - 0%
0   0   0
Hello, I have a 120g acrylic aquarium that has been up and running for a couple of years.

Recently I went on vacation and the person cleaning my tank pointed out 2 cracks and said it's a ticking time bomb.

Those 2 cracks have been there since the beginning and I don't think they have expanded at all.

The first crack is circled in red. It obviously goes straight through.

The second crack is circled in green. It doesnt go through.

Do you think I should be concerned?

Do I need to fix it or replace? The person said the following regarding fixing it :

"I get 4 pieces of half inch acrylic small pieces same area the cracks are , the acrylic glue I get Melts the acrylic together , I clamp the sections , once it's dried cracks are fixed and welded together "

I appreciate your help

IMG-20230707-WA0087~2.jpg IMG-20230707-WA0085~2.jpg IMG-20230707-WA0083~2.jpg IMG-20230707-WA0087~3.jpg IMG-20230707-WA0086~2.jpg IMG-20230707-WA0088~2.jpg IMG-20230707-WA0084~2.jpg
 
Hi, welcome to the reef
Yes agree with need and how to fix 100%
Emergency ,I'd say no , but better safe than sorry ... :)
If you need recommendation's for weld on , etc , just ask.
 
Hello, I have a 120g acrylic aquarium that has been up and running for a couple of years.

Recently I went on vacation and the person cleaning my tank pointed out 2 cracks and said it's a ticking time bomb.

Those 2 cracks have been there since the beginning and I don't think they have expanded at all.

The first crack is circled in red. It obviously goes straight through.

The second crack is circled in green. It doesnt go through.

Do you think I should be concerned?

Do I need to fix it or replace? The person said the following regarding fixing it :

"I get 4 pieces of half inch acrylic small pieces same area the cracks are , the acrylic glue I get Melts the acrylic together , I clamp the sections , once it's dried cracks are fixed and welded together "

I appreciate your help

IMG-20230707-WA0087~2.jpg IMG-20230707-WA0085~2.jpg IMG-20230707-WA0083~2.jpg IMG-20230707-WA0087~3.jpg IMG-20230707-WA0086~2.jpg IMG-20230707-WA0088~2.jpg IMG-20230707-WA0084~2.jpg
Being the eurobrace, you can use weldon and drill two holes on each side and apply a plexi or acrylic brace with nylon screws for a fix

1688777831321.png
 
I’m inclined to agree with your friend: ticking time bomb. Hard to see how you didn’t notice that. The eurobrace is essentially sheared and has lost a significant percentage of its structural role. Don’t think a bit of Weldon is fixing that.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top