Custom corner drop off tank diy

[Johnson]

Hello everyone
Ive been in the hobby for about 2 years now and have been contemplating a custom tank build. I have 2 150 gallon tanks now one a 150 tall and a 150 half moon. I have some larger tangs that are starting to out grow the 150 half moon . So I was thinking about doing a 450 gallon L shaped corner tank with a drop off. Any comments things I should be aware off I've built a few tanks but nothin of this size. I have a few drawing.

 

[prsnlty]

Following, seems like a sweet plan!

 

[Johnson]

I'll hopfully have a cad drawing I can post soon. Get a better idea then.

 

[Saw]

I just finished building 175 gallon drop off but not a corner drop off I can tell you the issues I dealt with is don't try to cut the glass if it needs to be an L shape yourself have it Factory cut on a water jet it will be stronger and use radiuses if you do have to make cuts no sharp corners try to use a steel frame and lots of support another issue I found was setting the glass on the bottom piece of glass cause stress and cracked it due to different water weights

 

[Johnson]

That was some issues I had thought about. Luckily I work for a commercial glass company and have access to an engineer( who is giving me a good safety factor for the project). I was going to do a steel frame and try to do euro bracing for the top and weld an aluminum frame for the bottom 2x2x1/8in angle.

 

[Johnson]

Slow to start here still waiting on my engineer to finish drawing up my tank. The tank I'm replacing is starting to get out grown.

 

[JoshH]

Going to have to watch this thread, sounds like an awesome build!

 

[Johnson]

Sump is almost done just need to figure out my compartment sizes. 60in x 26in x 24in ruffly a 150 gallon sump.

 

[AlexG]

Sump is almost done just need to figure out my compartment sizes. 60in x 26in x 24in ruffly a 150 gallon sump.

What thickness of glass did you use on the sump?

 

[Johnson]

What thickness of glass did you use on the sump?

I used 1/4". It won't be filled all the way so it should be able to handle it. Plus I'll be bracing the top and with the baffles it will handle the deflection.

 

[Johnson]

Got the drawing almost done here's alittle sneak peak.

 

[Johnson]

There's the rendering minus the stand. Hardest parts almost done last. I should be ordering the steel for the stand this week hopefully.

 

[Fishfinder]

Wow amazing

 

[Girthrockwel]

Looks like it'll be a really cool tank.

 

[Johnson]

Some of the equipment and plumbing parts came in over the week. I'm using eshopps eclipse L over flows only one came in. I'm gonna give vertex a try I ordered there Omega 180i for one of my skimmers. And my return nozzles came in 3/4 loc-line.

 

[Johnson]

Getting the steel cut up for the stand. I went with 2x2x3/16 steel tube. Hopefully get it finished today and start some welding tomorrow.

 

[Johnson]

Got both sides tacked up just need to run back and weld it up completely. So far so good. Forgot to take a picture of the other side.

 

[Johnson]

 

[Johnson]

Stand is all welded up. Now to figure out how I want to paint it. I thought about doing the roll in bed liner or an epoxy but I'm not sure

 

[Scurvy]

Cool Build! Will be watching. Your planning g a remote sump or under the long section of tank?