Design help please

[Rick Strauss]

Before I wire and fill with water Does anybody have any ideas how I can make this better. I have to say this site and people have gave me a lot of ideas and help by doing a lot of reading over the last six months thanks for all the ideas. I’ve been out of a reef for about 10 years or so and I see a lot has changed. My may equipment is 2 Abyzz A400s, deltec TC3070s skimmer, 2 Royal exclusive reactors, rollermat 3.0, 2 chillers 2 Emperor Equatics UVs, inverter, deltec PF601S calcium reactor, Deltec NF616 Nitrate reactor, 3 Masterflex pump and every Neptune piece possible. Runnng a large Refuge with a Kessil H1200. Doing 6Radion XR30Wpros with 3 250 watt metal Halides megachrome crystal. And 6 WAV power heads and 2 mp40s. On an 300 DT and a 150 DT running 2 Radions only and 2 gyro XF250. Any input would be greatly appreciated.

 

[nautical_nathaniel]

Those sort of look like backup batteries behind the sump and next to the wall in the first picture. I would probably locate those somewhere easier to access. Personally, I would be worried about one of them going bad and having to lift it up and over the sump and possibly dropping it or hitting something around the sump.

 

[Rick Strauss]

That's a good idea. I did use a gell battery so they won't off Gas.

 

[Rick Strauss]

Duplicate