Did my kid ruin my rodi?

Thanks all for the replies,replacing the depleted/broken parts isn’t an issue, was more of a rant than anything but also my first rodi...
 
After being in this business for 20+ years, I'd say that no, most reefers do not have 0 to 3 ppm TDS RO water. Most are higher than that.

Russ

I'd have to agree. I have no idea what the average supply water TDS is across the country, but 2-300 is not uncommon, and many membranes have a 96-98% rejection rate, so 250*(1-0.97) = 7.5. If you're lucky to have better supply water or have a better membrane that gives you 99% then a TDS of <3 is quite possible, but like everything, it depends!
 
RO DI.jpg I get 700 here in Chandler Az on a good day from the tap. Yeah I'm pretty sure I'm drinking from the Colorado. I am using a 7 stage RO/DI. I've only had this RO/DI setup running for 2 months. I believe I've made at least 250 gallons so far, maybe 300. My first DI stage is starting to show wear, maybe 40% color changed. I'm a total newbie but have watched ALL of the BRS videos and most of the others. BRS did a RO/DI vid about their "professional grade" DI. I'm following that. Going to do the Anion/Cation/Mixed Bed ( I may have the first 2 backwards here).

700ppm
Sediment
Charcoal
Charcoal
RO
35ppm
Anion
Mixed Bed (had 1 to use up
Mixed Bed
0 ppm



 
Last edited:
RO DI.jpg I get 700 here in Chandler Az on a good day from the tap. Yeah I'm pretty sure I'm drinking from the Colorado. I am using a 7 stage RO/DI. I've only had this RO/DI setup running for 2 months. I believe I've made at least 250 gallons so far, maybe 300. My first DI stage is starting to show wear, maybe 40% color changed. I'm a total newbie but have watched ALL of the BRS videos and most of the others. BRS did a RO/DI vid about their "professional grade" DI. I'm following that. Going to do the Anion/Cation/Mixed Bed ( I may have the first 2 backwards here).

700ppm
Sediment
Charcoal
Charcoal
RO
35ppm
Anion
Mixed Bed (had 1 to use up
Mixed Bed
0 ppm




Your membrane rejection rate is 95%. [(700 - 35) / 700]. I thought most reefers were using 98-99% rejection membranes. I know BRS sells them and out of Tempe, AZ there is a SpectraPure where I buy mine.

Since my water supply varies from 350-450TDS, I opted for the SpectraPure 98% membrane. That means I could be sending 7-9TDS to my DI and it would last much longer than if I was sending 35TDS to it as in your case.

Truth is, my membrane typically produces water in the 0-2TDS range. I know that is better than 99% rejection. I know SpectraPure does not “make” the membranes. Just about all the membranes in our hobby come from Dow (FILMTEC). I think what is happening in my case is that my post-use flushing method and use habits are keeping the membrane (now 2 years old) in pristine condition.

If I were you, I’d consider buying a 98% membrane or even better, one of SpectraPure’s 99% guaranteed membranes. You will be money ahead in DI resin.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top