Did too much flow do this to my green slimer?

[Chortanator]

There is a part of my green slimer where the coral seems to be rubbed off to the skeleton, this is the only spot facing the flow but the strength of the current is relatively weak. Could it be something else or is it definitely flow? The pencil urchin in the picture also likes to touch it a lot and rub its spikes all over it lol

 

[vetteguy53081]

There is a part of my green slimer where the coral seems to be rubbed off to the skeleton, this is the only spot facing the flow but the strength of the current is relatively weak. Could it be something else or is it definitely flow? The pencil urchin in the picture also likes to touch it a lot and rub its spikes all over it lol

While possible, so will:
- Temperature too warm
- salinity too high
- high alk
- high calcium
- Low Phos
- insuuficient or too bright of lighting
- Low dissolved oxygen
- Poor water quality related with phosphate levels up to 5 ppm
- Change in water flow
- Additions of sand
- Changes in brand of salt
- Bad test kits giving faulty results
- Levels of minor elements such as Iodine, Potassium, Strontium
- Changes in water flow
- Addition of new corals
- - Pesticides
- Airborne Contaminants or sprays

 

[Chortanator]

While possible, so will:
- Temperature too warm
- salinity too high
- high alk
- high calcium
- Low Phos
- insuuficient or too bright of lighting
- Low dissolved oxygen
- Poor water quality related with phosphate levels up to 5 ppm
- Change in water flow
- Additions of sand
- Changes in brand of salt
- Bad test kits giving faulty results
- Levels of minor elements such as Iodine, Potassium, Strontium
- Changes in water flow
- Addition of new corals
- - Pesticides
- Airborne Contaminants or sprays

So... literally everything could cause a dead spot like this. I can rule out most of this because I haven't made any changes to salinity, salt brand, sand, new corals, or airborne chemicals. My test kits are all Red Sea and Salifert but I haven't tested in a week. Should I test my levels?

 

[Chortanator]

Video of the flow

 

[vetteguy53081]

So... literally everything could cause a dead spot like this. I can rule out most of this because I haven't made any changes to salinity, salt brand, sand, new corals, or airborne chemicals. My test kits are all Red Sea and Salifert but I haven't tested in a week. Should I test my levels?

By all means test and even change water if necessary.

 

[vetteguy53081]

Video of the flow

You can increase flow slightly if you wish, but not harsh by any means.

 

[Cali Reef Life]

Green slimers like heavy flow unless your pump is close and hitting it full force I wouldn't say its flow. I would do the usual testing parameters alk, cal, mag, nitrate p04. Is there anything that could sting it close by? Check on the coral with lights off is there a pest. Looking at your tank you seem like you have the parameters down but always best to check.

I also see no algae and not an urchin keeper but I did see this thread. Not sure if urchin would turn without enough food. Keep an eye on him.
https://www.reef2reef.com/threads/will-an-urchin-eat-the-tips-of-sps.548508/

 

[Chortanator]

Salinity: 1.025
Temp: 77.1°F
Alk: 7.6dkh (haven't dosed yet so it will be 8.6 after dosing)
Calcium: 470
Nitrates: 5ppm (Salifert)
Phosphate: 0.1ppm

@Cali Reef Life My urchins eat the coralline algae on my rocks, it's absolutely covered with it. I also feed nori to the tank

 

[WWC Verified Sponsor]

Hello,

Your Nitrates are a bit low, We would normally like to see that over 10. Slimers like most all Acro love a bunch of flow.

 

[Cali Reef Life]

Salinity: 1.025
Temp: 77.1°F
Alk: 7.6dkh (haven't dosed yet so it will be 8.6 after dosing)
Calcium: 470
Nitrates: 5ppm (Salifert)
Phosphate: 0.1ppm

@Cali Reef Life My urchins eat the coralline algae on my rocks, it's absolutely covered with it. I also feed nori to the tank

Got it well heres a helpful video as well for Acros. Abe has a lot of helpful material related to acros.

 

[Chortanator]

Hello,

Your Nitrates are a bit low, We would normally like to see that over 10. Slimers like most all Acro love a bunch of flow.

Thanks for the input, I'm currently trying to raise them since they bottomed out on me recently, just coming out of week-long dinos, thankfully it didn't last longer. But I have NeoNitro that I could dose

 

[WWC Verified Sponsor]

Thanks for the input, I'm currently trying to raise them since they bottomed out on me recently, just coming out of week-long dinos, thankfully it didn't last longer. But I have NeoNitro that I could dose

If you ever need anything just give us a shout!

 

[Chortanator]

If you ever need anything just give us a shout!

Yeah, I need you guys to ship to Canada lol

But thank you! Hopefully upping the nitrate will allow the coral to bounce back

 

[SunnyX]

Hello,

Are you certain that the coral is a green slimer?(Yongei) From the picture provided, it doesn’t look like any of the slimers I have or had over the years. What you have looks more like a Tort.

As for the bleaching, it looks to be in on section so it could possibly be getting attacked by another coral or perhaps even a Vermentid snail. These tube snails will release a mucus net, damaging corals nearby. Other than those suggestion, it could be anything by what you have doesn’t look like a standard STN/RTN.

-Sonny

 

[Chortanator]

Hello,

Are you certain that the coral is a green slimer?(Yongei) From the picture provided, it doesn’t look like any of the slimers I have or had over the years. What you have looks more like a Tort.

As for the bleaching, it looks to be in on section so it could possibly be getting attacked by another coral or perhaps even a Vermentid snail. These tube snails will release a mucus net, damaging corals nearby. Other than those suggestion, it could be anything by what you have doesn’t look like a standard STN/RTN.

-Sonny

It was sold to me as a green slimer, but nothing was labelled at the LFS so it might not be one. Looking at photos of others', mine looks pretty different. I don't have any corals on that side of the tank - there is a bubble tip nem but it doesn't reach to the coral. There is a space invader frag on the left about 3.5-4 inches away I don't see any vermetids at all either.

 

[Dburr1014]

So... literally everything could cause a dead spot like this. I can rule out most of this because I haven't made any changes to salinity, salt brand, sand, new corals, or airborne chemicals. My test kits are all Red Sea and Salifert but I haven't tested in a week. Should I test my levels?

Nailed down for you, huh?

Looks like shading on that one side, right?
What lights do you have and do you know the par?
Is this coral in the middle of the tank or close to one side?
More flow would not hurt.

 

[Chortanator]

Nailed down for you, huh?

Looks like shading on that one side, right?
What lights do you have and do you know the par?
Is this coral in the middle of the tank or close to one side?
More flow would not hurt.

It looks like the exposed skeleton, completely white and smooth to the touch. I have it near the top of the tank, I'm not sure what the par is but I have a Radion G4 XR30 running the AB program at about 50% on my 55g. It's in the middle, right under the light because I heard they like a lot of light, and I have one wavemaker on the right side of the tank that I moved off to the side of the glass a little because I thought that was what was causing the dead spot

 

[Dburr1014]

It looks like the exposed skeleton, completely white and smooth to the touch. I have it near the top of the tank, I'm not sure what the par is but I have a Radion G4 XR30 running the AB program at about 50% on my 55g. It's in the middle, right under the light because I heard they like a lot of light, and I have one wavemaker on the right side of the tank that I moved off to the side of the glass a little because I thought that was what was causing the dead spot

If it keeps progressing I would recommend saving a frag off of it.
How's it doing today?

 

[polywise]

The coral is on a frag disc. I would try to move the coral to a higher location on your rocks & try to mount it central to lighting- so there is no shadowing.

 

[ss30]

Salinity: 1.025
Temp: 77.1°F
Alk: 7.6dkh (haven't dosed yet so it will be 8.6 after dosing)
Calcium: 470
Nitrates: 5ppm (Salifert)
Phosphate: 0.1ppm

@Cali Reef Life My urchins eat the coralline algae on my rocks, it's absolutely covered with it. I also feed nori to the tank

How often do you dose?