- Joined
- Sep 16, 2018
- Messages
- 75
- Reaction score
- 102
- What state or country do you live in
- Virginia
Treating a friends tank for flukes/ich, he has been feeding medicated food for a number of days at this point (general cure/metroplex + focus + entice) and running a newly purchased UV on a fledgling ~180g setup.
The tank at this point was cycled for 4 months, then slowly began adding utility fish, and other hardy fish to start. Clowns, a few tangs, etc. Things were going very well until somehow something got into the tank and suddenly all the fish were covered in white 'flags'.
Began treating with prazi, then after that did nothing, added a UV and medicated food. The good news is that the fish are largely on the mend, but the pH of the tank has plummeted. down the 7.5x from what was a nice and stable 8.x before treatment.
We've done several 30% water changes and nothing has changed about the pH. Re calibrated the probes, and tested with a drop tester kit, and still getting the same reading. Tank has a trident on it, and as of the time of this posting, the ALK is 7.9. I've attached some pictures of the logs. The second pH log has the spike showing the re calibration, but you can see the pH is bumping along the bottom.
I've asked him to open his windows (no effect), asked him if he has pilot lights anywhere, no gas in the house. I'm running out of ideas as to whats going on with the pH, and if it could be a result of the medication (almost has to be right?) and what to do about it. Thanks.

The tank at this point was cycled for 4 months, then slowly began adding utility fish, and other hardy fish to start. Clowns, a few tangs, etc. Things were going very well until somehow something got into the tank and suddenly all the fish were covered in white 'flags'.
Began treating with prazi, then after that did nothing, added a UV and medicated food. The good news is that the fish are largely on the mend, but the pH of the tank has plummeted. down the 7.5x from what was a nice and stable 8.x before treatment.
We've done several 30% water changes and nothing has changed about the pH. Re calibrated the probes, and tested with a drop tester kit, and still getting the same reading. Tank has a trident on it, and as of the time of this posting, the ALK is 7.9. I've attached some pictures of the logs. The second pH log has the spike showing the re calibration, but you can see the pH is bumping along the bottom.
I've asked him to open his windows (no effect), asked him if he has pilot lights anywhere, no gas in the house. I'm running out of ideas as to whats going on with the pH, and if it could be a result of the medication (almost has to be right?) and what to do about it. Thanks.



