DIY AI Blade mount help
- Thread starter Schulks
- Start date
- Tagged users None
I do like how you can adjust the angles with yours
bullseyereef
Active Member
Did the blade clips come with the blade? Or did you order them separately?Just under 6". But I made an adjustment and attached my Primes to the brackets as well. This caused the front to have a slight tilt, but it's not very noticeable.
Alsteezy1st
New Member
Mine originally came with the low profile tank mounts. I believe the 39 inch + come with the clips. I ordered the clips from BRS.
Blade LED Mounting Clips
A set of two mounting clips for the Blade Smart LED Strip Lights from AquaIllumination. These clips are compatible with the AI HMS Single Arm Mount or HMS Hanging Kit rails. What's in the Box? 2x Blade Mounting Clips 2x Mounting Screws 2x Mounting Nuts 2x Cable Ties
www.bulkreefsupply.com
Bj’s Reef
Valuable Member
Can you share a picture of the mount you made. I think it would help a lot of us.
OP
OP
Schulks
Well-Known Member
I did decide to try it and I ordered the parts. I updated the thread with pictures on page 2 near the bottom in the thread.
You could connect the Blade to the orphek arms in a lot of ways but this is what I did. If I was using the orphek arms for a longer Blade light I would buy the clips from BRS instead of using the m8 mounting holes on the ends.
OP
OP
Schulks
Well-Known Member
if the other option, with the current arms, will work for you I would go that route. The pictures look really nice but I haven't tried it and mine has it's advantages. If you need it mounted on the sides of the aquarium or if you want to be able to move the bar wherever/however high you want (as long as your lid permits) use the orphek arms. It is sturdy and works. I think it just feels a bit bulky for my 12" blade.
Last edited:
troutbum17
Community Member
I don’t mean to pivot this thread, but it seems like there are a fair number of blade owners in this thread. Are any of you all experiencing issues with unbalanced light across the bar, or power cord wire exposure where it connects to the fixture like I’ve seen in some other threads?
flatlander93
Active Member
I’m wondering about this too. Obviously there are some problems with these but how widespread is something I want to know too. I really think this is the best light option for my cube. I’d get the Orphek but with a controller they will be quite expensive I think.
I took this route and am thrilled. Thanks for sharing!I bought a couple of these and some blade mounting clips to try out as soon as they get delivered. Might be worth a shot for some people if it works.
XW Orbit LED Adjustable Tank Mount Bracket (4194) - Current USA
Shop The Best Saltwater Aquarium Equipment & Supplies at Saltwater Aquarium. We Carry Everything you will Need for your Fish Tank.www.saltwateraquarium.com
It would be nice if we could develop a tank lid to use with the tank rest arms. The low profile is really appealing!
Maybe have 3 or 4 tank lids to add between the blades. It would facilitate maintenance as when needed we would just remove the lids and push the blades together to free up space.
Maybe have 3 or 4 tank lids to add between the blades. It would facilitate maintenance as when needed we would just remove the lids and push the blades together to free up space.
Glowurm
Active Member
Genius, been looking at how i could supplement my Primes without breaking the bank and these brackets might be the answer...I bought a couple of these and some blade mounting clips to try out as soon as they get delivered. Might be worth a shot for some people if it works.XW Orbit LED Adjustable Tank Mount Bracket (4194) - Current USA
Shop The Best Saltwater Aquarium Equipment & Supplies at Saltwater Aquarium. We Carry Everything you will Need for your Fish Tank.
Little disappointed that AI dont have better mounting options when it comes to the Primes (buyer regret)
