DIY AIO 5gallon nano
- Thread starter This guy is Extra Salty
- Start date
- Tagged users None
OP
OP
This guy is Extra Salty
Active Member
I sent you a pm
Jurgen Frenz
Active Member
How think is the Acrylic?Thanks for the input I will make future ones with a lower return outlet.
But I found an extra hydor flow generator that works beautifully with the setup. No splashing or micro bubbles..
If it gets more traction I could make a media rack/insert for it also
OP
OP
This guy is Extra Salty
Active Member
It is 1/4in acrylic(.220)
it’s the protective plastic that is on the bottom, I didn’t bother peeling it off since it somewhat protects it
Thank you
Thank you I’m working on media rack/inserts for them
I’m in the process of making the fuge insert
(So it blocks out the light on the side) I haven’t decided on it yet cause you might want to add another light to the side of the tank as well as the back for more growth. (Your tank not mine)
Well the 11g is full of water. If these become more popular I’m going to have to have them burst/pressure tested per lot number
It’s on day 5 no leaks the sides have a slight bow to them but it’s normal for a rimless tank.
Well I was bored again at work( I have to finish the lids)
The large monster can is for size reference
Hemmdog
10K Club member
Nice!!!!! Wow this could really save me some spaceIt is 1/4in acrylic(.220)
it’s the protective plastic that is on the bottom, I didn’t bother peeling it off since it somewhat protects it
Thank you
Thank you I’m working on media rack/inserts for them
I’m in the process of making the fuge insert
(So it blocks out the light on the side) I haven’t decided on it yet cause you might want to add another light to the side of the tank as well as the back for more growth. (Your tank not mine)
Well the 11g is full of water. If these become more popular I’m going to have to have them burst/pressure tested per lot number
It’s on day 5 no leaks the sides have a slight bow to them but it’s normal for a rimless tank.
Well I was bored again at work( I have to finish the lids)
The large monster can is for size reference
OP
OP
This guy is Extra Salty
Active Member
thanks I got tired of looking at my old ones I made from a couple years back
(I was dosing the RSCP)
OP
OP
This guy is Extra Salty
Active Member
Having the bottom sheet frosted?
Yea I can I was just using what was lying around. I will keep an eye out though, I’m kind of tempted on using mirror acrylic as a bottom.
Yea I can I was just using what was lying around. I will keep an eye out though, I’m kind of tempted on using mirror acrylic as a bottom.
OP
OP
This guy is Extra Salty
Active Member
Here is a custom sump I was asked to make
It was really tricky, but it was fun to do
It was really tricky, but it was fun to do
OP
OP
This guy is Extra Salty
Active Member
Another sump order (they wanted to assemble themselves) 7 line dosing line-holder? That was an oops on my end lol freebie!
OP
OP
This guy is Extra Salty
Active Member
Here are a couple other things I have been doing
Lingwendil
Well-Known Member
OMG want that glowy dino skull
OP
OP
This guy is Extra Salty
Active Member
I will have to assemble the rest of the velociraptor tonight or I can just make a bunch of the skulls
Kamden Uelton
Well-Known Member
How much would you do for a 10g acrylic tank for a Mantis Shrimp?
OP
OP
This guy is Extra Salty
Active Member
100$ +shipping
My design is an 11gallon peninsula
OP
OP
This guy is Extra Salty
Active Member
It’s 14in from nose to tail..OMG want that glowy dino skull
I’m making some green ones today if you’re interested
Kamden Uelton
Well-Known Member
PM me please
