DIY Dosing Containers | BRStv Spotlight

[randyBRS]

Hey guys!

Got a quick one today about building some DIY Dosing Containers. Show us what you did to make yours!!

 

[Twins Dragonz]

For 13 bucks, save myself time to get space saver container from BRS. Just my 2c.

 

[revhtree Verified Admin]

Awesome DIY!

 

[Scubabum]

Voss water bottles for me.

 

[BlennyKravitz]

Voss water bottles for me.

Me too! Although it was embarrassing paying $3.79 for 800mL of water at Whole Foods. I told everyone in line I was making dosing containers so they wouldn’t think I was crazy. It didn’t work.

 

[firefishalumacraft]

I did what they did in the video, I just used tupaware cereal containers with rubber flip lids from Ikea. Cheap and food grade safe.

 

[jsker]

Here you go link

 

[Alvin Alejandro]

Me too! Although it was embarrassing paying $3.79 for 800mL of water at Whole Foods. I told everyone in line I was making dosing containers so they wouldn’t think I was crazy. It didn’t work.

What is that in the green container?

 

[don_chuwish]

I've done this and found that somewhere in the tubing to bulkhead to rigid tube transition there is an air leak. Dosing line is always getting air bubbles in it. Only work around for now is to put the dosing tube directly in the container. Any ideas to fix it? I've already done the obvious, clean cut on all tubing, removed burrs, no debris, etc.

 

[BeachBum2012]

Me too! Although it was embarrassing paying $3.79 for 800mL of water at Whole Foods. I told everyone in line I was making dosing containers so they wouldn’t think I was crazy. It didn’t work.

I'm doing the same thing right now!

 

[TbyZ]

 

[shiftline]

Keep it classy boys!

 

[srad750c]

I saved the jugs from my AquaForest 3pt and I have my MTC dual chamber air powered Prodoser that I’m going to retrofit.
Been wanting to use it for about 10-15 years I don’t have a doser yet. Looking into that next year. Have to figure out what’s good.

 

[ReefBeta]

Hey guys!

Got a quick one today about building some DIY Dosing Containers. Show us what you did to make yours!!

Is that tube the 1/4" tube that fit into 1/4 air line? I got some from LFS, but they don't seem to fit. I have to put a part of air tubes on it, then put it in for it to stay.

 

[randyBRS]

Is that tube the 1/4" tube that fit into 1/4 air line? I got some from LFS, but they don't seem to fit. I have to put a part of air tubes on it, then put it in for it to stay.

Typically airline is too soft and pliable to work with push connect fittings and create a seal. The tubing in this video is the same 1/4" tubing we use for RODI units.

-Randy

 

[randyBRS]

I've done this and found that somewhere in the tubing to bulkhead to rigid tube transition there is an air leak. Dosing line is always getting air bubbles in it. Only work around for now is to put the dosing tube directly in the container. Any ideas to fix it? I've already done the obvious, clean cut on all tubing, removed burrs, no debris, etc.

I've had the same experiences before, but I've been able to resolve them from disconnecting and reconnecting the lines. If you're using the polyethylene 1/4" tubing for the dosing lines, it shouldn't have a problem sealing. You could also try replacing the bulkhead with new one to see if that particular bulkhead is the issue.

-Randy

 

[shiftline]

For inside the jug use 1/4” OD acrylic. For outside 1/4” RODI tubing works perfect

 

[LbulletM]

Me too! Although it was embarrassing paying $3.79 for 800mL of water at Whole Foods. I told everyone in line I was making dosing containers so they wouldn’t think I was crazy. It didn’t work.

Oooooohhh. Me likey the painted caps! Smart!

 

[shiftline]

My current setup

 

[BeachBum2012]

Oooooohhh. Me likey the painted caps! Smart!

Going to make mine purple to match everything else.