DIY Fixing Kessil 350 fan

DLuce510

A.D.I.D.A.A.
View Badges
Joined
Jan 17, 2015
Messages
521
Reaction score
299
Location
Antioch, Ca.
Rating - 0%
0   0   0
I've seen I'm not the only one who's had their fan go out on their 350w and have the light go on and off. It can be frustrating to say the least. Now you could deal direct with kessil which from what I hear has very excellent customer service but if for some reason your impatient or not able to, this is for you.

First off I tried to just replace the fan but apparently it's crazy hard to find a 48v 60mm fan. It seems the common fan you can get is 12v
20160723_164539.jpg


So I had to find other option. I went to Frys and looked for a 48v to 12v converter no luck, called around, no luck. So I poked around for a hour and came across these.
20160723_153707.jpg


Instead of trying to find a converter or a 48v fan I would replace it with a common 12v fan which leaves me with options to up grade or replace. Only down side is the fan now takes up one outlet. I left the store for about $15.
20160723_153733.jpg

Cut the old one out and replaced it. Had to make a small mod to get the new fan plug through the top of the light.
14693184778331896802841.jpg


Plugged it in to a phone charger and boom back to being a well oiled coral going machine.
20160723_154208.jpg

I hoped this helped some one, thanks for letting me share!
 
I like your ingenuity. :)

If you get into a bind for those kinds of components in the future, check out http://www.digikey.com

They have a bunch of 48V 60mm fans.
 
48V fans are a bit unusual, usually reserved for really fast noise makers in that size (for telecom stuff). Curious that Kessil didn't slap down a simple 48->12V buck converter - guess the fan was cheap enough :)
 
Great job!
 
Thanks guys!
I like your ingenuity. :)

If you get into a bind for those kinds of components in the future, check out http://www.digikey.com

They have a bunch of 48V 60mm fans.
That's definitely good to know. This fix is deffinitly if you get stuck in a pinch but the proper repair is always best for sure.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top