DIY Radeon clone?

[dantimdad]

From my discussions with LED group buy and Rapid LED and Steve's, there isn't a 3 watt 420nm that can handle over 700ma that is readily available. You should actually run them at 600ma but they will still pulse to 700ma.

I was kinda bummed about this until I realized the PAR and PUR you get out of them even at this power.

Just FYI.

(I know someone is going to post a link to one that can handle more power, but, I did say readily available. That also means a reasonable cost for DIY)

 

[Kampo]

I know the lumileds can take it that blueacro uses, but there the only ones I know of.

Plans on driving mine are 700mah, and just limiting them to 90% should be ok. going to run the whole array I think on 700s except for the RB and i'll do those at 1amp, going to add 6 Luxeon C RB to that channel. and going to add 2 Luxeon C Mints to the white. (might do 4 mints and put them on there own channel)

 

[dantimdad]

Keep us posted!

I will PM you about our previous discussion

 

[Kampo]

you guys think a 12inch makers slim heatsink is enough? prolly will have 2 92mm fans on it running at 7V to keep it cool.

 

[dantimdad]

Since you won't be running all channels on full and you will be actively cooling it, I would say yes. Just keep an eye on it at first to be sure.

 

[paphater]

I run two arrays on my 12" heat sink and one fan and it is cool to the touch.

 

[theatrus]

I've not heard much from the blue acro camp. I was looking to buy another 4 of the ones I have from him but not received any response back. Having said that the four that I have work well and punch through the 30" depth I have. I just need four more If I don't end up getting any from him I was leaning towards the multi chips from Nanobox. I like how those look and are cheaper. I think they could fit in with my set up.

Something probably got lost in the shuffle - let me know!

 

[Crabs McJones]

This thread is cool! Going to have to try this

 

[User1]

Something probably got lost in the shuffle - let me know!

I will email again - just looking to buy another 4 blue acro pro's

 

[rushbattle]

Anybody have an opinion on this puck? Seems pretty good, but the 1A rating on the 420nm seems suspicious, so I’m worried it’s not on the up and up.

https://www.ebay.com/itm/5-Channel-...itm=232632304835&_trksid=p2047675.c100623.m-1

 

[dantimdad]

Looks good but I don't trust the rating on the 420 either. 600mA is closer to the right current.

 

[ihavecrabs]

Did anyone on this thread document their build process? I would love to read through it if so!

 

[Kampo]

there are a few builds in here. also google other diy light builds. I'll prolly make update posts but prolly won't step by step the whole thing.

 

[ihavecrabs]

there are a few builds in here. also google other diy light builds. I'll prolly make update posts but prolly won't step by step the whole thing.

Yeah there were a few in here that went through the build list which was helpful. A how-to thread would be awesome, but totally get it!

 

[Kampo]

if you are looking to build a led light, there are plenty that have done it, heck shoot me a PM and I can help out too. I'm kinda a diy junky and led nerd.

 

[dantimdad]

if you are looking to build a led light, there are plenty that have done it, heck shoot me a PM and I can help out too. I'm kinda a diy junky and led nerd.

Same here.

 

[Ariel V Rosa]

Anybody have an opinion on this puck? Seems pretty good, but the 1A rating on the 420nm seems suspicious, so I’m worried it’s not on the up and up.

https://www.ebay.com/itm/5-Channel-Cree-Semileds-25-Multichip-LED-Royal-Blue-White-UV-Aquarium-Light/232632304835?_trkparms=aid=222007&algo=SIM.MBE&ao=2&asc=20160323102634&meid=584bb33a1ded4359a3eb0875acb5fa22&pid=100623&rk=3&rkt=6&sd=372315188608&itm=232632304835&_trksid=p2047675.c100623.m-1

Those are rated for a Max current on 800 mA, they should be ran at 600 mA. Depends on your cooling solution.

 

[Warneto1]

Starting a build for a 150 sps dominated: several pucks have been mentioned...

Has anyone made a build with these? kampo mentioned maybe they would not require a blue supplement.. suggestions?

https://www.ebay.com/itm/5-Channel-...ED-Aquarium-Light-For-Reef-Tank-/192565230541

Thanks!

 

[dantimdad]

Well u certainly wouldn't need more blue or violet.

 

[Kampo]

I have 2 of those on order. I think it's prolly fine without supplement. I'm planning on ading 2 mints to the white and 4 royal blue to the royal blue for some headroom on that channel.