DIY Radeon clone?

  • Thread starter Thread starter Kampo
  • Start date Start date
  • Tagged users None
WWC
Jump to Last
Chewy.com
yes I like the 16x luxeon chip, prolly the best "bang for buck" chip avail for royal blue they are a surplus part from I beleave a DLP projector i've heard. I run them at 600, which is enough for what I need. i've run them at 1amp before it was fine but they did get quite warm at full
 
When building a fixture is it better to blow the fan on the heat sink or pull the heat from it
 
Top Shelf Aquatics
Diggem said:
When building a fixture is it better to blow the fan on the heat sink or pull the heat from it
Click to expand...
push or pull fans are not so much different in effectivity.
the air pressure of your fan & directing the air threw your heat-sink-fins, is more relevant

i want to go with pull, just hoping to get a little bit less dust.
blocking the fins to the top beside the fan (with alu or copper same material as heat-sink)& forcing the air to come from left & right sides over the whole heat-sink-fins...
 
Kampo said:
yes I like the 16x luxeon chip, prolly the best "bang for buck" chip avail for royal blue they are a surplus part from I beleave a DLP projector i've heard. I run them at 600, which is enough for what I need. i've run them at 1amp before it was fine but they did get quite warm at full
Click to expand...

I run 3 of those luxeon k16's over my 40" tank, I believe the price now is $15 for 5, I don't think you can beat that for price, I run mine at 700ma and at 2500 on the 12 bit pwm, coupled with a DIY version of the storm X controller, came in less than $400 for my build (I don't live in the US, so approx cost after exchange rate) a pair of radeons would have cost more than double.

If I do be I DIY build again it would probably cost less due to all the bits I've wasted or changed and probably wouldn't build pendants due to all the extra wiring and headaches it gave me...
 
ReefBot Lab, Automated Water Tester
thehammer1985 said:
so what's better this build or doing the arcoblue
Click to expand...
personal preference I have both. I think the blueacro leds are better quality substantially. that said to get the power i'm putting down in my tank now i'd need 3 acrostar pros and that would of set me back 270 vs the 80 in leds I spent on the chinese pucs plus the mints and k16 blue i added. if money was no object yeah I'd go with blueacro and see if he would tweak the led layout a smidge for my tastes or go with nanobox led pucs, but i'm cheap and like to tinker so I went cheap.
 
thehammer1985 said:
so what's better this build or doing the arcoblue
Click to expand...

arcoblue uses mutch better LED´s of corse they cost a bit more & produces in USA(price USA vs China), but you have not so many options to play around with your color setup or channels...
his new products (drivers & led on board) look small, clean & nice if he would let me choose my channels & colors he would be the best!!!
LEDBrick - DIY LED Pendant with Pucks

i want to buy theatrus(arcoblue maker) reefpi board easy & clean i just have to wait for full version (hope he sends to europe)
 
boneone said:
arcoblue uses mutch better LED´s of corse they cost a bit more & produces in USA(price USA vs China), but you have not so many options to play around with your color setup or channels...
his new products (drivers & led on board) look small, clean & nice if he would let me choose my channels & colors he would be the best!!!
LEDBrick - DIY LED Pendant with Pucks

i want to buy theatrus(arcoblue maker) reefpi board easy & clean i just have to wait for full version (hope he sends to europe)
Click to expand...

Europe and customized channel loadouts aren’t a problem :)
 
theatrus said:
Europe and customized channel loadouts aren’t a problem :)
Click to expand...
when your reefpi board full version will be ready/avalible?:rolleyes::D
LiquidSoftIvorybackedwoodswallow-size_restricted.gif
;):)
i am thinking of starting with pi zero w & PCA9685 for lighting/dimming only (just droped my plans to start with tc421 because of your thread :oops:)
and adding your board for full funktion...



i think i will start with cheap chiniese but will be goning to expand/change them...
my lighting plans are 4 my first tank so i got to buy a lot 2k€+(without lifestock):eek: & another real cool open source 3d projekt 1k€+:eek: (http://vorondesign.com/voron2.1)
so it might take some time planing (allready over 1month & still changing...;Sour), buildung & playing around, but i will be coming back to your custom offer :)

do you got mint (C, CZ or any) led´s on your new boards?(or old)
what will be ~ the cost of a custom 2 channel 8 led board with shipping to europe?(or 4 channel)
 
Nutramar Foods
boneone said:
when your reefpi board full version will be ready/avalible?:rolleyes::D
LiquidSoftIvorybackedwoodswallow-size_restricted.gif
;):)
Click to expand...

Its more a matter of docs, case, and more community validation things are working as expected. So far no major revisions are planned.

i am thinking of starting with pi zero w & PCA9685 for lighting/dimming only (just droped my plans to start with tc421 because of your thread :oops:)
and adding your board for full funktion...
Click to expand...

Pretty foolproof setup honestly.

i think i will start with cheap chiniese but will be goning to expand/change them...
my lighting plans are 4 my first tank so i got to buy a lot 2k€+(without lifestock):eek: & another real cool open source 3d projekt 1k€+:eek: (http://vorondesign.com/voron2.1)
so it might take some time planing (allready over 1month & still changing...;Sour), buildung & playing around, but i will be coming back to your custom offer :)

do you got mint (C, CZ or any) led´s on your new boards?(or old)
what will be ~ the cost of a custom 2 channel 8 led board with shipping to europe?(or 4 channel)
Click to expand...

I have 5 main variants of board (with the worst naming scheme in history)

AcroStar 1/2 Mega: 8x Luxeon Z, 2 channels.
AcroStar Mega4Z: 16x Luxeon Z, 4 channels.
AcroStar 1/2 MegaC: 8x Luxeon C, 2 channels, 2 positions (1 per channel) can take a 3535. Has a curious cutout shape designed to allow air to pass through 2" round heatsinks. Not on the website.
AcroStrip C: 6x Luxeon C or 3535 LED, in a narrow strip. 2 channels (some positions take either a C or 3535). No longer on the website, limited stock of the blanks.
AcroStar Gleam: 16 LED board I was experimenting with in the thread, 3 channels of Luxeon C and 1 of 3535. Larger reflector than any of the other AcroStars (Ledil Angela vs Ledil Brooke).

All of the C positions can take Mint. Pricing varies based on LEDs but I don't upcharge for custom (just may take me longer to ship). DM me for a layout price.
 
ok after following this thread since I've been out of the diy led lights for a while I'm super intrigued. I dont mean to hijack and feel free for lambasting me for it but right now I'm running this

8x 2700k 3w 1a
10x rb 3w 1a
2x far red 3w 700ma
6x uv semi led from 410-425?
2x cyan 3w 700ma
2x true blue 3w 700ma
this is over my biocube I built it like 4 years ago and still works pretty dang good... where to go from here suggestions. yall really have me wanting to utilize these blueacros. the other question how many blueacro 4z over a biocube and can I run my 6up ldd board for the channels
 
BRS
thehammer1985 said:
ok after following this thread since I've been out of the diy led lights for a while I'm super intrigued. I dont mean to hijack and feel free for lambasting me for it but right now I'm running this

8x 2700k 3w 1a
10x rb 3w 1a
2x far red 3w 700ma
6x uv semi led from 410-425?
2x cyan 3w 700ma
2x true blue 3w 700ma
this is over my biocube I built it like 4 years ago and still works pretty dang good... where to go from here suggestions. yall really have me wanting to utilize these blueacros. the other question how many blueacro 4z over a biocube and can I run my 6up ldd board for the channels
Click to expand...
Do you have the 36v or 56v LDD modules? That would be LDD-L or LDD-H respectively. Then what voltage is your power supply.

Your setup looks pretty good, but the Blueacro are really nice for sure.
 
thehammer1985 said:
ok after following this thread since I've been out of the diy led lights for a while I'm super intrigued. I dont mean to hijack and feel free for lambasting me for it but right now I'm running this

8x 2700k 3w 1a
10x rb 3w 1a
2x far red 3w 700ma
6x uv semi led from 410-425?
2x cyan 3w 700ma
2x true blue 3w 700ma
this is over my biocube I built it like 4 years ago and still works pretty dang good... where to go from here suggestions. yall really have me wanting to utilize these blueacros. the other question how many blueacro 4z over a biocube and can I run my 6up ldd board for the channels
Click to expand...
honetly not a ton you would need to change. only thing I would do is more Royal blue, and less warm white. and maybe ad a few mints.
 
rushbattle said:
Do you have the 36v or 56v LDD modules? That would be LDD-L or LDD-H respectively. Then what voltage is your power supply.

Your setup looks pretty good, but the Blueacro are really nice for sure.
Click to expand...

Mine is 3 lddh 1000ma and 3 lddh 700ma but I have and extra 1000ma to swap. my power supply I'd have to replace. The biggest reasons I've thought about the swap is the tightness of the leds for blending and being able to put a wide angle lense/diffuser on it.
Plus I've seen so many good reviews on them.

Kampo said:
honetly not a ton you would need to change. only thing I would do is more Royal blue, and less warm white. and maybe ad a few mints.
Click to expand...

If I do end up staying with this setup if I swapped out some warm whites for cool whites would that be ok... also would swapping my old leds for something in the 90+ cri add any benefit over 80 cri. For the mints would you swap the cyan or leave the cyan and just add mints
 
Avast
thehammer1985 said:
Mine is 3 lddh 1000ma and 3 lddh 700ma but I have and extra 1000ma to swap. my power supply I'd have to replace. The biggest reasons I've thought about the swap is the tightness of the leds for blending and being able to put a wide angle lense/diffuser on it.
Plus I've seen so many good reviews on them.



If I do end up staying with this setup if I swapped out some warm whites for cool whites would that be ok... also would swapping my old leds for something in the 90+ cri add any benefit over 80 cri. For the mints would you swap the cyan or leave the cyan and just add mints
Click to expand...

I think changing your whites to half Luxeon C sunplus whites from Stevesled and half Luxeon C Mint would be a good idea. and possibly split the channel to two seperate ones.
 
I looking to build a light for a 20 gallon high tank I want to start any suggestions and I have a 55 I have a 48" orbit I'm on it not strong enough to keep Coral would you build a whole new light or build something to supplement it
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

https://affordableaquaria.com/
Top Shelf Aquatics
Deltec
Chewy.com
Nutramar Foods
Dinkins Aquatic Gardens
Tidal Gardens
World Wide Corals
TCK Corals
New Posts
Back
Top