Does 1.026 SP = 35 PPT?

  • Thread starter Thread starter fftfk
  • Start date Start date
  • Tagged users None

fftfk

Active Member
View Badges
Joined
Oct 19, 2014
Messages
205
Reaction score
117
Rating - 0%
0   0   0
I always thought 1.026 = 35. No matter how much I calibrate/retest, etc. I can not get 1.026 = 35 ppt on my refractometer. I always end up with 1.026 = .34.

IMG_8244.jpeg


Forgive the blurry picture. I think that is a function of focusing it for eyesight and then trying to take a photo with my camera. It reads 1.026 with a sharp line and and about 34.5 PPT. When I get my water to 1.026 the refractometer always reads just below 35 ppt or even 34 ppt.

Is it a function of my tank water being different than the refractometer stated temp? If so, should I try for SG or PPT measurement?
 
I always thought 1.026 = 35. No matter how much I calibrate/retest, etc. I can not get 1.026 = 35 ppt on my refractometer. I always end up with 1.026 = .34.

IMG_8244.jpeg


Forgive the blurry picture. I think that is a function of focusing it for eyesight and then trying to take a photo with my camera. It reads 1.026 with a sharp line and and about 34.5 PPT. When I get my water to 1.026 the refractometer always reads just below 35 ppt or even 34 ppt.

Is it a function of my tank water being different than the refractometer stated temp? If so, should I try for SG or PPT measurement?
At 78 degrees fahrenheit, 35 (ppt) = 1.0264 (specific gravity)
 
Here's a good calculator

 
looks like it's also not level

lol - if there is a trick to get a photo looking through your phone through the refractometer pointed at the light bulb and get it level please let me know!

I guess I could have used the alignment tool in photos to make it appear level.
 
lol - if there is a trick to get a photo looking through your phone through the refractometer pointed at the light bulb and get it level please let me know!

I guess I could have used the alignment tool in photos to make it appear level.
Yeah, it's not like the line stays horizontal if you tip the refractometer... It reads the same even if you're laying down (although I don't know why you're testing salinity laying down ;) )
 
A brine refractometer (which is most common in the hobby) will not line up 35 ppt and sg = 1.0264, while a true seawater refractometer will.
 
I think this answered my question. When people say they target 35 ppt or 1.026 SG it is assumed they mean at 78 degrees as both measures are affected by temperature.... correct?
 
SG is affected by temp and salinity. Salinity is not affected by temp. Its units are g/kg. SG is basically density of the seawater with g/l as the unit. A liter of water at 78F is not a liter of water at 70F.
 
SG is affected by temp and salinity. Salinity is not affected by temp. Its units are g/kg. SG is basically density of the seawater with g/l as the unit. A liter of water at 78F is not a liter of water at 70F.
Specific Gravity is unitless
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top