Dosing Container

[madcanary]

Im running the DDR and a set of bottles with RODI fitting has anyone found a decent 4 chamber dosing container?

 

[ken77]

Im running the DDR and a set of bottles with RODI fitting has anyone found a decent 4 chamber dosing container?

If you do i would like to know as well

 

[madcanary]

I got ya when I do.

 

[HolisticBear]

If you do i would like to know as well

You don't like the RODI fitting in the lids? I saw the mur-lok taps in the BRS video and planned on doing the same

 

[madcanary]

I did this but I didn't like it I still have 2 like this and my DDR, I like to be able to see my liquids.

 

[Jerel]

A second DDR isn’t an option?

 

[madcanary]

It is. Before I drop another 200 bucks on one I wanted more options.
I’m not compeatly sold on the DDR.

 

[Jerel]

I see- There are a few 4 chamber dosing containers available for roughly $100.

 

[blazeby]

I use this one plus their one container version for my 4-part: http://a.co/gBbMdEu

 

[TheHarold]

It is. Before I drop another 200 bucks on one I wanted more options.
I’m not compeatly sold on the DDR.

$200? I thought theyre $300?

 

[dealseer]

$200? I thought theyre $300?

Interesting. I’ve never seen them higher than 200

 

[madcanary]

$200? I thought theyre $300?

the DOS (doser) is 300 the DDR (container) is 200.

 

[madcanary]

You don't like the RODI fitting in the lids? I saw the mur-lok taps in the BRS video and planned on doing the same

I did this but didn't like it because I couldn't see in the bottles, I'm sure there is a way to tack dosing with Apex i could probably figure it out.

 

[bdejong1112o]

I am at the same decision point. I am planning my purchases and if bought with the DOS the 2 chamber container is 149. But time 2 it adds up. I was planning to do the same as BRS with the murloc connector right on the bottle. I get the wanting visibility and hope someone chimes in on how to track usage with the neptune system. I may post it on thier dedicated forum to see if they have options. 300.00 is 300.00 in my book.

 

[HolisticBear]

I had Blue Tide make me a custom ATO container after I read about their custom work on a few R2R threads. I had positive experience and might use them for a custom dosing container if I decide to upgrade from the tapped bottle caps. Their prices seem very fair.

 

[Shameless_Dood]

I don't know about the Neptune, but my Kamoer doser will keep track of it for me. I just drilled a couple holes in the top of the bottles just ever so slightly smaller than the tubing and stick the tube down the bottle, nothing fancy.

 

[Bob Escher]

I use this one plus their one container version for my 4-part: http://a.co/gBbMdEu

I use the same ticked me off I couldn’t find a four part one now I’m thinking of gluing them together

 

[Frances Hunter]

I bought the Kamoer dosing containers, also have the Kamoer doser.

 

[Kent12456]

I saw a diy thread on these and I went this route. You get three 800ml glass bottles with plastic screw on lids that can be drilled to add fittings. $30 on Amazon. Painted advertising on bottles scrapes off easily with a razor. Bottles have a slightly over sized mouth. Commercially made Dosing containers pricing is ridiculous.

 

[Whipples]

Does your doser not track how much you filled and what level it is at? My GHL does that, I just tell it how big the container is, how much liquid is in it, and to alert me when it drops to a certain ML level and it does the rest. Does the DOS not do that within Apex?

I agree, dosing containers are a box of acrylic and why they are so expensive is beyond me. The glass VOSS bottles work, and you can always use beer growlers and tap the tops for more holding power:

https://www.amazon.com/Growler-Ambe...&qid=1506617474&sr=1-6&keywords=glass+growler