Drilled return line help

[Heres_doe_]

So I'm looking to drill the tank for the return line it's a 125g. I've already drilled the overflow. Is there a complete kit that i can just buy or what exact parts would i have to buy for this. Doing LOC line didn't want a elbow going up and over the tank. One other thing should i do ¾ for the full return or 1" and finishing in ¾ for the loc line as i don't think they make 1" loc line. The overflow is 1".

 

[vetteguy53081]

Aqueon has a kit and also aquafx (I believe is the name)

 

[monkeyCmonkeyDo]

Gonna have to do it 3/4" and get the smaller bulkhead too...you could find a 3/4" Overflow kit. Usually they come with a bit, template, bulkhead, and an Overflow. You'll just use the template and the bit and bulkhead and end up ordering the loc line seperate....
Hths u

 

[Heres_doe_]

Gonna have to do it 3/4" and get the smaller bulkhead too...you could find a 3/4" Overflow kit. Usually they come with a bit, template, bulkhead, and an Overflow. You'll just use the template and the bit and bulkhead and end up ordering the loc line seperate....
Hths u

Timeout are you saying they don't sell a bulkhead and to buy an entire overflow box!?

 

[Heres_doe_]

I guess i found what i need

 

[fishface NJ]

BRS has all of the part you need if you don't want to buy a kit. I didn't buy a kit and bought each part

 

[Heres_doe_]

BRS has all of the part you need if you don't want to buy a kit. I didn't buy a kit and bought each part

Would that mess with the structural of the tank drilling 2 holes in the tank

 

[fishface NJ]

On a 125g one could drill for an overflow, a return on the left side, and it wanted one return on the right.

 

[Heres_doe_]

I wanted to do 1 in the middle and the left

 

[fishface NJ]

Overflow in the middle and return on the left?

 

[Heres_doe_]

No problem with that setup.

Ok thanks a ton

 

[CaliCajun]

I'm actually doing the exact same thing right now, modular marine over flow and a 1" return drilled on a 125. I'll be using VCA 1" return line and nozzle to make it work.

1" line: https://vividcreativeaquatics.com/shop/1in-modular-tube-5-knuckle-segment/
nozzle and adapter: https://vividcreativeaquatics.com/s...ator-with-1in-modular-hose-fitting-rfgs100ll/

hope that helps