Kyl
And how does it feel like, to wake up in the sun
Icecap modules are overpriced simple IC's. I still think we're going to see the ICV6 <> Apex connectivity within the next 6 months, that should bring gyre support with it.
Dual Gyre settings.
- Thread starter USMA36
- Start date
- Tagged users None
jaxteller007
Valuable Member
- Joined
- Mar 27, 2018
- Messages
- 1,387
- Reaction score
- 763
I have one icecap 3k on my 75 and I can't seem to find a spot and setting where it's not making the opposite end sand bed really low.
Part of the issue I assume is it being on the same side as my return line (which I havent had a chance to rerun yet) I also cant tell if its micro bubbles or sand lol
Part of the issue I assume is it being on the same side as my return line (which I havent had a chance to rerun yet) I also cant tell if its micro bubbles or sand lol
jaxteller007
Valuable Member
- Joined
- Mar 27, 2018
- Messages
- 1,387
- Reaction score
- 763
What's lunar mode?
jsker
Reefing is all about the adventure
On the newer gyres and controllers there is the lunar mode that pulse less the the title mode. I had a hard time setting up mine and you like to customize mine more. Programming buy pushing button make it real hard and once Maxspect comes up with a wifi model of the controller I think that will be a winner for all
mta_morrow
Of course I have room for 1 more fish!
I run 2 gyre XF250’s in my 5’ 108 gallon on OTC AT 50% max.
I run mine about 3” from the top, just low enough that they are not sucking air.
Not sure how much you have in the tank but I would focus on the flow and corals and let the nem find it’s new happy place.
I run mine about 3” from the top, just low enough that they are not sucking air.
Not sure how much you have in the tank but I would focus on the flow and corals and let the nem find it’s new happy place.
reacclimating 2 the hobby
patience is... oh look an acro pack fs!
I'm glad you posted this. I was just about to go searching for people with 5' tanks and two xf250's
I've read so many build threads I forget to just go look at yours. Are you aiming the cages towards the surface as well?
on my 93 cube, I run them facing each other a little off-set, i.e. not directly in front of one another. They run on alternating, manual gradual pulsing mode at 30% on one side and as the one pump ramps down the other pump ramps up to 20%. Antyhing higher than this would splash water over the side.
mta_morrow
Of course I have room for 1 more fish!
Cages are in the straight forward position.I'm glad you posted this. I was just about to go searching for people with 5' tanks and two xf250's
Also easy to install them upside down and make a serious sand storm!
The QC sticker should be on top At least that is how mine came.
reacclimating 2 the hobby
patience is... oh look an acro pack fs!
Cages are in the straight forward position.
Also easy to install them upside down and make a serious sand storm!
The QC sticker should be on top At least that is how mine came.
No sand for me! Thanks again for the tips!
mta_morrow
Of course I have room for 1 more fish!
You’re very welcome!
Captain Quint
Plank Owner of the Orca
I replaced my Ecotech Marine MP40W QD wireless with two 230's a year ago and ran OTC at a low setting but about 2 weeks ago switched them to L.T.C. but the BTA's seem to do well. I really do not know exactly what to set at. I'm definitely going to watch the video in this thread and I am looking forward to dialing in as suggested. They are going from 10 to 40 randomly.
Great thread here. Yet another reason to be a part of such a great forum and the good folks here.
Great thread here. Yet another reason to be a part of such a great forum and the good folks here.
t5Nitro
Valuable Member
Ooh gottcha. I havent placed my pump order yet since its sunday anyway. I've been really back and forth about a second gyre or adding a 6095 or 6105 instead to my 3 ft 75. How do you feel about the new pumps to your old set up?
