Easy water changes!
- Thread starter GRIFTY
- Start date
- Tagged users None
Pepcrylic
Active Member
My system is in a fish room with a dry sink.
I tee'd off my return pump, plumbed it to the dry sink with a valve. The Saltwater mixing barrel is 3' higher than my sump. I plumbed the the FreshSaltwater outlet to the sump, again with a valve.
My sump holds enough water to do a 50 gal WC while the system is running. (less the skimmer)
Water out, turn valve. Fresh Saltwater in, turn valve.
I tee'd off my return pump, plumbed it to the dry sink with a valve. The Saltwater mixing barrel is 3' higher than my sump. I plumbed the the FreshSaltwater outlet to the sump, again with a valve.
My sump holds enough water to do a 50 gal WC while the system is running. (less the skimmer)
Water out, turn valve. Fresh Saltwater in, turn valve.
dbl
It Takes Less Energy to be Nice
Excellence Award
Reef Tank 365
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
Hospitality Award
My Tank Thread
You might want to check out the thread linked below. Many of the mixing stations are also designed to make water changes very easy. Some are more elaborate than others. Fairly cheap is a relative term, but maybe you'll get an idea from one of the examples.
http://reef2reef.com/threads/salt-water-mixing-stations-lets-see-them.36873/
http://reef2reef.com/threads/salt-water-mixing-stations-lets-see-them.36873/
25 Foot - Python No Spill Clean and Fill Aquarium Maintenance System
Any 300gph or greater water pump, and tubing for it. Make sure it is powerful enough for length of tubing you choose, and adjustable one would be best if not sure.
Drain the water with the python. Refill from 5g or 25g buckets of mixed salt water using the pump.
Total cost about $75-100 --- Never having to lug a bucket of water again. Priceless.
I do recommend adding a shutoff valve to the end of the refill to prevent adding to much on accident and running across house to unplug the pump.
------------
Any 300gph or greater water pump, and tubing for it. Make sure it is powerful enough for length of tubing you choose, and adjustable one would be best if not sure.
Drain the water with the python. Refill from 5g or 25g buckets of mixed salt water using the pump.
Total cost about $75-100 --- Never having to lug a bucket of water again. Priceless.
I do recommend adding a shutoff valve to the end of the refill to prevent adding to much on accident and running across house to unplug the pump.
------------
As an Amazon Associate we earn from qualifying purchases.
Jlobes
5000 Club Member
haha, i just did a WC the other day and took a few pics, because it was so easy!!
I use a pvc rig to remove the water from tank, it goes straight into the toilet. the open suction for the pvc is at the ideal level for 25G removal. then I have a mixing/rodi storage station in the bathroom about 20-25' from the tank. everything is mixed there and then pumped to the tank. easy peasy!! no lifting, carrying or moving buckets, only have to do that for the 30G nano upstairs.
heres a few pics:
I use a pvc rig to remove the water from tank, it goes straight into the toilet. the open suction for the pvc is at the ideal level for 25G removal. then I have a mixing/rodi storage station in the bathroom about 20-25' from the tank. everything is mixed there and then pumped to the tank. easy peasy!! no lifting, carrying or moving buckets, only have to do that for the 30G nano upstairs.
heres a few pics:
Rhino
Well-Known Member
haha, i just did a WC the other day and took a few pics, because it was so easy!!
I use a pvc rig to remove the water from tank, it goes straight into the toilet. the open suction for the pvc is at the ideal level for 25G removal. then I have a mixing/rodi storage station in the bathroom about 20-25' from the tank. everything is mixed there and then pumped to the tank. easy peasy!! no lifting, carrying or moving buckets, only have to do that for the 30G nano upstairs.
heres a few pics:
This is pretty genius. I know what I am doing this week! This is going to make my water changes so much easier.
If you look up a waterbed drain kit you can get the same sink attachment as the python for like 6 bucks. You can hook up to a water hose and use the pvc setup above ( @Jlobes posted) to only drain a certain amount of water, with the sink attachment holding the hose in place and starting your syphon. Then pump water back in.
As an Amazon Associate we earn from qualifying purchases.
chefjpaul
2500 Club Member
I have a Hydrofil pump mounted inside the stand with the return line bracket to sump area.
All i do is put the mounted hose in bucket and flip a switch from the power bar. Finished, just roll up the hose and hang it back on a hook in stand.
All i do is put the mounted hose in bucket and flip a switch from the power bar. Finished, just roll up the hose and hang it back on a hook in stand.
Lionfish Lair
Renee
This is my QT water changer. I think the most QTs I had going at one time was 7. I needed a cheap, easy and safe way to change between 1-5 gallons in a 10 gallon tank. I included the word "safe" because what I was doing up to this point was not. It seems you should not multi-task during a water change that has the potential to empty your tank. I've completely empty a tank and found the fish all ticked off in the bottom. One time I had rigid tubing sitting in there draining water and it fell out with the weight of the tubing and took a seahorse with it.
I made a set of these for every tank. I start the siphon and leave, knowing it will empty only what I want it to and it won't fall out of the tank.
I made a set of these for every tank. I start the siphon and leave, knowing it will empty only what I want it to and it won't fall out of the tank.
