Eb832 24v port

[leon.1980]

How do I determine what my 24vpoet can lower? I recently purchased a plank auto feeder and I have no outlets open for it!
Does it matter which line connects to which on the adapter for the 24v adapter cord?

 

[Sisterlimonpot]

The 24v ports have a 30w max load, you'll have to be sure what ever you plug into it doesn't exceed that.

And it is a DC port which means that the positive and negative have ti be wired correctly.

The 24v ports use a 2 prong molex connector.

 

[leon.1980]

The 24v ports have a 30w max load, you'll have to be sure what ever you plug into it doesn't exceed that.

And it is a DC port which means that the positive and negative have ti be wired correctly.

The 24v ports use a 2 prong molex connector.

How would I know this on most things?

 

[Sisterlimonpot]

How would I know this on most things?

Know what?

 

[n2585722]

The 24v ports use a 2 prong molex connector.

Is this the same ones used on the PMUP pumps. Those are Molex Microfit 3.0 connectors I believe. I use those pumps in my mixing station.

 

[Lbrdsoxfan]

Is this the same ones used on the PMUP pumps. Those are Molex Microfit 3.0 connectors I believe. I use those pumps in my mixing station.

Those are it.

 

[vetteguy53081]

How do I determine what my 24vpoet can lower? I recently purchased a plank auto feeder and I have no outlets open for it!
Does it matter which line connects to which on the adapter for the 24v adapter cord?

I throw my highest power user which are my orpheks on this outtlet, however in the past , I used it as any other outlet

 

[A_Blind_Reefer]

I thought the plank was ac voltage with a dispensing motor and a pump?

 

[Lbrdsoxfan]

I thought the plank was ac voltage with a dispensing motor and a pump?

This.

That 24vdc port aint gonna cut it. You either need to pull something of minimal importance off the eb832 and put it on a smart strip (or something like it) or pony up for. EB832/EB4

 

[A_Blind_Reefer]

This.

That 24vdc port aint gonna cut it. You either need to pull something of minimal importance off the eb832 and put it on a smart strip (or something like it) or pony up for. EB832/EB4

…and then they’ll have plenty of outlets for the next toy!