Ecotech Radion Gen 5 Pro’s - Mobius - Need Help

[Hendrix]

I have a new build in process and have (4) Ecotech Radion Gen 5 Pro’s with Mobius. I’m suffering from User Issue or this we is not intuitive. I’m trying set the PH14 template. I have been successful but now I would like to know:
- what the intensity is setting are color by color?
- want to adjust based on my par meter

can anyone point me to a good tutorial

more data in my build thread below.

sorry it’s long

Tanks
AS aka Hendrix

 

[Aqua Splendor]

Click on the left bar to access individually the channel color.
Your intensity is set a 85% right now i think

 

[AcanthurusRex]

If you like the colors on the template leave the individual points alone.
Tap the "schedule" and the overall intensity will pop up. Looks like you already adjusted it since it should be set at 50% by the template; at least AB+ sets it at 50%.
If you tap the "time" bar on the left you can cycle through the points.

 

[Hendrix]

Thank you, I found that menu once by accident.

Now I know how to get to it.

 

[Camaro Show Corals]

I love my g5 pros and phix14 spectrum

 

[Hendrix]

Now I know how to work the lights, need some help on intensity & PAR.

500 Gallon reef: (4) Ecotech Radion GF Pro's
- 9" Above the water
- PAR read by Neptune APEX Par Meter
- Bare Bottom
- Tank is visible from two rooms
- Ton of detail in my build thread down by signature

Par Reading in Yellow Sun's above.

Here is a mock up looking down from Top: 4" Euro Bracing shown in Lite Blue

The rock formation as you can see is at least 10" away from the front and back glass.

I'm Thinking SPS Dominant mixed reef:
- Sticks in middle center (16" of height room for growth from rock) - Under Middle (2) G5's
- Table Corals around the middle ends - under the far left and right G5's
- Monti's to left and right side's near the overflow side's (The black boxes are the overflows)
- Some Zoa's filling in the seams

What do you think?
- want to hear from Stick folks?
- Montie's and tables will be placed where shading is ok over time
- Zoa's along the bottom on something flat.
- Tank is euro braced around on inside bottom perimeter as well with black silicon

Thanks
AS AKA Hendrix

 

[Hendrix]

Bump - Any body have feedback

 

[Camaro Show Corals]

What intensity % are you running the radions

 

[Hendrix]

Schedule Intensity is 80%

 

[Gordonm]

Click on the left bar to access individually the channel color.
Your intensity is set a 85% right now i think

When we select the template can u adjust individual colors or are we stuck with what the template gives us? I'm not talking about light intensity.

 

[Hendrix]

Using PHX14 template that set the light intensity.

 

[Gordonm]

When we select the template can u adjust individual colors or are we stuck with what the template gives us? I'm not talking about light intensity.

??????

 

[Hendrix]

??????

You can save your own templates. I believe you can modify theirs and save under new name. I’m new at it

 

[Gordonm]

Yeah i looked at mine and learned something new.