EcoTech RMS Radion mount kit interview/review (Reef Builders)

RandoReefer · Mar 12, 2015

Check out the new hands-in review of the EcoTech Marine RMS (Radion Mounting System) from Reef Builders!!

Hands on video with the Ecotech Marine Radion Mounting System

How many of you use these?

Are you happy with them and would you recommend them?

Any improvements you'd like to see?

Randy
EcoTech Product Test Team

Fishface1970 · Mar 12, 2015

I just installed the RMS and a Radion about 2 weeks ago on my 29 gallon reef. I had to mount from the side of the tank to avoid the center brace. It was very easy to put together and install. The only thing I don't like is that I had to use the longest arm to reach the center of the tank and my light hangs off balance (it dips to the side away from the RMS). It would be nice if the light didn't dip down but it really isn't a problem for me. I love my Radion and so do my corals!

RandoReefer · Mar 13, 2015

sekunda2003 said:
I just installed the RMS and a Radion about 2 weeks ago on my 29 gallon reef. I had to mount from the side of the tank to avoid the center brace. It was very easy to put together and install. The only thing I don't like is that I had to use the longest arm to reach the center of the tank and my light hangs off balance (it dips to the side away from the RMS). It would be nice if the light didn't dip down but it really isn't a problem for me. I love my Radion and so do my corals!

So it's a bit too "flimsy" for you, when extended out?
Do you run XR15 or XR30?

I would like to try these out for my next build. Right now I'm using the Premium Hanging Kits and a couple of Long Rail Kits.

I like the idea of using the Multi Light RMS with the hanging kit. The horizontal maneuverability is exactly what I need for my 6' tank.

Fishface1970 · Mar 13, 2015

RandoReefer said:
So it's a bit too "flimsy" for you, when extended out?
Do you run XR15 or XR30?

I would like to try these out for my next build. Right now I'm using the Premium Hanging Kits and a couple of Long Rail Kits.

I like the idea of using the Multi Light RMS with the hanging kit. The horizontal maneuverability is exactly what I need for my 6' tank.

It's not that it's flimsy… the weight of the XR30 just makes it sag because it's setting all the way at the end. The light is very sturdy, it just sags some. I thought about getting the bigger mounting kit, but couldn't afford the extra $ at the time so I got the single. I will post a pic as soon as I get a chance...

SCMatt · Mar 14, 2015

My question, and concern, about these is how does the X bracket affect the fan on top of the light? I have an XR15 pro and was just curious if the X bracket blocked most of the fan intake.

RandoReefer · Mar 14, 2015

Oh yah, I wonder that too SCMatt I would hope they thought of that.

Have you noticed any blockage sekunda2003 ?

Fishface1970 · Mar 14, 2015

RandoReefer said:
Oh yah, I wonder that too @SCMatt I would hope they thought of that.

Have you noticed any blockage @sekunda2003 ?

I can't say on the XR15, but on the XR30 the bracket sits flush on the top of the light. The fan is on the bottom and the vents are on the top outer edges. No blockage what-so-ever. It seems the airflow is up from the bottom then over the tops of the LED pods and out the ends.

fbodykiller · Mar 17, 2015

SCMatt said:
My question, and concern, about these is how does the X bracket affect the fan on top of the light? I have an XR15 pro and was just curious if the X bracket blocked most of the fan intake.

There is a gap between the fan and the x bracket

Shamus · Mar 18, 2015

I like the mount. Its well built and looks good but, the light doesn't sit level and that bugs me a little. I want to put a wedge in it to level it out someday.

fbodykiller · Mar 18, 2015

Are you guys using this mount on a rimless tank or on a rimmed tank? My tank is rimless and its solid!

Shamus · Mar 19, 2015

Mine Is on a rimless. Its solid, but leans forward a little if that makes sense. It still is a nice mount and I like it better than the hanging kit.

Fishface1970 · Mar 19, 2015

My tank is rimmed. The mount is solid, but the weight of the XR30 on the very end of the longest arm makes it dip down about 3/4" from where it should be. It's not really a problem, it would just look better if it was level. I'm mounting from the side to avoid the center bracing and need to be able to reach the center of a 30" wide tank. I'm pushing the extreme limits of this bracket.

RandoReefer · Mar 19, 2015

fbodykiller Shamus sekunda2003

Would you be willing to post a picture of your kits on your tanks? As well as anyone else who is using them...[emoji4]

Once I make my tank move later this year, I'll buy some to play around with. I'm sure I'm not the only one yearning to see them in action!

Shamus · Mar 19, 2015

ImageUploadedByREEF2REEF1426803658.554430.jpg

ImageUploadedByREEF2REEF1426803706.506577.jpg

Hard to see the tilt of the light but here are a couple pictures.

fbodykiller · Mar 19, 2015

Here ya go. Not quite up and running yet. Hope to get it wet soon!

fbodykiller · Mar 19, 2015

And here is my temporary fix for Ecotech's oversight in manufacturing until I get the die grinder out and cut the bolt!

RandoReefer · Mar 20, 2015

Shamus said:
Hard to see the tilt of the light but here are a couple pictures.

fbodykiller said:
Here ya go. Not quite up and running yet. Hope to get it wet soon!

Great stuff guys, thanks! Glad to get a couple different views from both the XR30 and XR15. Shamus , I see how yours is extended to the max. This would be a concern of mine as well, having a deep front-to-back myself .
fbodykiller coming along nicely!! I now see SCMatt concern about fan blockage on the XR15. Great showing of the "cosmetic" fix to an ugly eyesore. Hopefully the next models address this issue.

Thanks for sharing!