Email alert alarm is off?

[Lifelongaquaria]

Can anyone tell me what this really means? Far as I can tell it means it won't notify me. what the heck?

 

[Lifelongaquaria]

Is this the same smpt issue as back in 2016?

 

[Lifelongaquaria]

Pic

 

[NotFishyFishGuy]

Pic

I think it means that there is nothing wrong at the moment, like after the temp go too high, it went down and everything is fine. But I’m not completely sure.

 

[Lifelongaquaria]

I thought that might be the case but unless I look at code I am not sure. Having trouble finding the factory code for outputs in fusion though.

 

[Lifelongaquaria]

Only code I see is the set off command and that's obviously not the code for the way it functions.

 

[Lifelongaquaria]

Or is this a threshold alarm issue where my value is out of warning limits for a split second but not when actual alert is sent?

 

[Lifelongaquaria]

The actual warning: :
(Apex Fusion Alarm: apex) Status: OFF
Statement: Alarm is off
Date: 2019-11-05 17:58:02 -0600

 

[SuncrestReef]

It looks like the Salt and Tmp probes are triggering alarms when they exceed a threshold, then when the condition returns to normal it's turning off the alarm and the EmailAlm code is sending you the "all clear" notification.

You can adjust the thresholds for these alarms in the Input settings for Salt and Tmp, or disable them if you choose.

 

[Lifelongaquaria]

Yes you're right when a parameter went out of range virtual outlet for email alarm turned back on. I apologise for the dumb questions new to Apex and really haven't found a glossary of statement conditions yet. Thank u

 

[Lifelongaquaria]

Can anyone tell me where I can read the factory output logic codes without opening a prompt shell. Been able to right logic since I was young so being able to read it would really help me check things like this.

 

[SuncrestReef]

Yes you're right when a parameter went out of range virtual outlet for email alarm turned back on. I apologise for the dumb questions new to Apex and really haven't found a glossary of statement conditions yet. Thank u

Since you're new to the Apex, you might benefit from reading my 8-part Apex programming tutorial series here on R2R:

Part 1 Introduction
Part 2 Timers
Part 3 Automatic Top-Off Kit (ATK)
Part 4 Power Monitoring
Part 5 Virtual Outputs
Part 6 Alarms
Part 7 Feed Cycles
Part 8 Lunar Schedule and Lighting Profiles (Conclusion)

 

[Lifelongaquaria]

Thank u again. Once I'm used to the way it translates to text I will chill out I swear. Lol