Evergrow / Semigrow replacement driver needed

McPikie · Mar 8, 2019

So I think the driver is knackered on my IT2080 for the 3 UV bulbs. They started flickering the other night.

I've had to set it to go from 10 to zero on the blue channel now as 1-9 shows up the flicker and is causing fish stress.

Does anyone have a spare one, or know the part number/voltage etc, so I don't have to take my light unit down and pull it apart before ordering?

oreo54 · Mar 8, 2019

Historically these boxes have used various drivers..Would be hard to "guess" at the exact one inside..
One person listed this as a part # for your model:
2G-3856W-ZN

Trying that led to this.. different but prob very similar..
Getting one retail though???
http://www.welitpower.com/en/index.php?case=archive&act=show&aid=223
These specs matter..

Output voltage range：70-100V
Output current：600mA

As well as dimming..

good luck.

Oh, most likely specs on yours:
50-100V
500-550mA..

McPikie · Mar 9, 2019

Thanks for that dude, but I think they are the drivers for the main lights, not the small ones

oreo54 · Mar 9, 2019

Those are for the main lights. One for white, one for blue. Don't confuse "listed" Watts with real Watts per channel.
https://www.ebay.com/itm/Evergrow-I...=true&nordt=true&rt=nc&_trksid=p2047675.l2557

McPikie · Mar 9, 2019

This is what I need

oreo54 · Mar 9, 2019

Oh for moonlights...Sorry let me check this a bit.

http://www.recifal-france.fr/reparation-rampe-it2080-t31473.html

In my defense I'm used to people needing the main drivers...Or a senior moment

McPikie · Mar 9, 2019

oreo5457 said:
That's for the fans

Its not. The fans are on and I've unplugged that driver. The fans run as soon as the settings go over 10

oreo54 · Mar 9, 2019

Corrected the error. Sorry , just not firing on all cylinders on this.
I assume the channel is dimmable soo substitutes won't work..
https://www.aliexpress.com/item/2-3...0-260V-300mA-Used-For-Various/2044535643.html

From the labeling its almost like a custom part and I can't find any matching equivalents by case style..

McPikie · Mar 9, 2019

Guess that could work. Will order and try it. Cheers

Andrei P · Mar 16, 2019

Hello ,
i have the same issue . Have you solved yours and how ?

McPikie · Mar 18, 2019

I've ordered a new driver. Will have to see if that solves the problem when it finally arrives from China

Peña · Jul 25, 2019

Hi mates! I have the same problem. Did you get somewhere the proper driver? That would sort It out? Thanks

Peña · Aug 8, 2019

Update. I get the new driver. Now Moon leds work but this driver only has 2 power conections and evergrows original driver has a third one to conect to the led screen, so you cannot switch off never while is powered.
Sorry for my english.
Now trying yo get the original to fix It properly

Myths384 · Nov 4, 2019

Hi did you ever get it fixed

Myths384 · Nov 13, 2019

Anybody any idea where I can get one of these for my evergrow lighting unit

Peja160 · Oct 8, 2020

McPikie said:
This is what I need

Hi did you find replacment as I have the same problem

d5332 · Nov 10, 2021

Hi. Anyone ever figure out how to get these driver replacements?

oreo54 · Nov 10, 2021

(2021) Hi,

That's called the moon LED driver. We have a small number left under the parts section on our website. We discontinued these about 4 years ago so parts are very limited.

From reefbreeders but " build" is the same.