Filter Roller for Red Sea Reefer 350 Sump

[Zoajohn]

I'm interested in getting a filter roller for my Reefer 350 sump to cut down on changing socks/floss. I have an older version of the sump - either the V1 or V2 not really sure. From what I've researched, there are not many options aside from removing the baffle from the overflow section in the sump and installing the roller filter directly to plumbing. I'd like to avoid this if possible. Aquamaxx came out with one that was designed specifically for the Reefer 170 sump. Does anyone know if this will work in the 350 filter sock holders, or if there is another filter roller out there that will work?

 

[Bepis]

The Klir fits almost any filter sock holder

 

[Zoajohn]

The Klir fits almost any filter sock holder

Except Red sea according to BRS

 

[Zoajohn]

Bump. Really would like to toss the filter socks for one of these. I have seen 3D printed brackets for the reefer 170, though that is only a single sock holder instead of the 2 the reefer 350 has.

 

[The Opinionated Reefer]

Just get a Clarisea sk3000 that's what i have in my reefer 350 with the older sump and the filter sock area ripped out.

 

[ArmyReefer]

Just get a Clarisea sk3000 that's what i have in my reefer 350 with the older sump and the filter sock area ripped out.

Recci

I would like to do this, but I would need to pull my sump offline do it and put it back. How long did it take you to cut out the baffles?

 

[MichaelReefer]

Still trying to find out a way to make one work with my 525xl but no one seems to have ever done it.

 

[The Opinionated Reefer]

Recci

I would like to do this, but I would need to pull my sump offline do it and put it back. How long did it take you to cut out the baffles?

It was done while the tank was getting set up so the sump was not even installed. I done remember how long but was no easy task.

 

[Dave Gold]

The Klir fits almost any filter sock holder

No it does not, you need an adapter for RedSea.

 

[Zoajohn]

I ended up taking a blade to the red sea sock holder to fit the klir bracket. It works well enough and saved me from spending $50 on another piece of plastic. I run a filter cup in the other sock holder