Fish tank stand

[ndz98]

I've got a 75 gallon tank that I need to build a stand for and I'm torn between building it with high quality plywood or with 2 x 4's. I like plywood because it looks very clean and very few cuts to make. I like 2 x 4's because I've seen some very unique stands that turn out very nice using just those and it can be a lot cheaper.

I'd like to see some of your stands that you've built whether it was plywood or 2 x 4's ( or even 2 x 6's). I'd like to know if you think a beginner could make something like it or if it's more of an experienced person job. Total cost and tools would also help if you remember. Thanks in advance!

 

[smh254]

Use 2x4s and cover in plywood.

 

[Even Further]

Here's my stand I just made from 3/4" plywood. The plywood sheet cost $25 plus a few scraps pieces I had, $100 for the granite top. Inside white paint was $15, and the stain and clear coat I already had from other projects.

Plywood construction also maximizes sump compartment space. With corners being caulked, it will also contain a leak. I think plywood takes more patience. The cuts and measurement need to be good so it all square, co-planer, and level.

 

[Sleepydoc]

I made my stand from hickory - essentially 1x3's and ¼" plywood panels.

2x4's work but are overkill for most tanks and many designs I've seen significantly cut into the interior space, as Even Further alluded to. As s/he said, the cuts need to be square, but this holds for any construction technique. If you use dimensional lumber, you need to make sure it is straight and square. You'd be surprised how difficult it is to find straight 2x4's.

 

[Acro maniac]

Here's my stand I just made from 3/4" plywood. The plywood sheet cost $25 plus a few scraps pieces I had, $100 for the granite top. Inside white paint was $15, and the stain and clear coat I already had from other projects.

Plywood construction also maximizes sump compartment space. With corners being caulked, it will also contain a leak. I think plywood takes more patience. The cuts and measurement need to be good so it all square, co-planer, and level.

What type of wood did you use for the door? And is that cabinet grade birch plywood? Also what color stain did you use? Sorry all the questions but that is really similar to the look i want with the build im doing right now. Looks awesome

 

[Even Further]

Thanks bud!
Wood is pine, sanded 1 side interior/exterior general grade from Lowes. Its not cabinet grade, but it is a good quality flat piece. Joints are pocket screws with construction adhesive. Stain is Kona Rustolium base color, spot white-wash and blended with other gray paint that was watered down, with 2 coats of Modern Master semi-gloss clear. The clear really makes it look like a piece of quality furniture. The distressed texture look of the door was done with an electric hand planer, its just the same plywood.

 

[ReeferMaddness843]

2x4 stand with 3/4" oak top and skimned in 1/4" hardwood. Measure twice, cut once. Super simple project. Tools used were a circular saw, square, level, clamps, drill, and a piece of wood for a giude for long straight cuts. (Top pic is pre second coat of stain on front)

 

[Acro maniac]

Thanks bud!
Wood is pine, sanded 1 side interior/exterior general grade from Lowes. Its not cabinet grade, but it is a good quality flat piece. Joints are pocket screws with construction adhesive. Stain is Kona Rustolium base color, spot white-wash and blended with other gray paint that was watered down, with 2 coats of Modern Master semi-gloss clear. The clear really makes it look like a piece of quality furniture. The distressed texture look of the door was done with an electric hand planer, its just the same plywood.

Good to know, Awesome technique i could see the planer markers but never thought of doing it on plywood. Also the clear is something i hadnt thought of thanks

 

[Sleepydoc]

Thanks bud!
Wood is pine, sanded 1 side interior/exterior general grade from Lowes. Its not cabinet grade, but it is a good quality flat piece. Joints are pocket screws with construction adhesive. Stain is Kona Rustolium base color, spot white-wash and blended with other gray paint that was watered down, with 2 coats of Modern Master semi-gloss clear. The clear really makes it look like a piece of quality furniture. The distressed texture look of the door was done with an electric hand planer, its just the same plywood.

Not to nit pick, but the top looks more like marble...

Great stand. Kudos to you for finding a flat piece of plywood at Lowe's - that's better than I can do! I think a lot of people are intimidated or unsure of how to do the joinery with plywood, so having some examples makes it easier.