Florida well water

[Jvesche20]

Hello,

I recently moved to south florida and bought a house.

I have a well in the back yard for the sprinklers. Because it’s a well I don’t pay for the water. I purchased a TDS meter. I checked my tap water and it’s reading 120. I went outside and tested the well water and it’s 150.

I’m planning on getting a new tank set up in the upcoming months. I wanted to see if it’s fine if I set up my RODI to the well. I don’t feel like the water is that bad. It would save me money since I’ll be having a 200+ gallon tank.

I’ve also heard some people destroy their filters with well water but they are using a lot harder water.

Is there something else I can test for my water to make sure it’s not going to destroy my filters?

Any input would be appreciated

 

[Doctorgori]

You can use 150 TDS, I wouldn’t but depending on what’s in it you could…maybe …probably not tho
ICP test is in order here regardless
I’d wager a booster also

 

[slowwrx137]

I'm in Central Florida and I'm on well water also. We have a Iron filter/water softener that the water runs through prior to entering the house. I'm using this RO/DI below from Bulk Reef Supply and just recently changed my filters after a little over a year. I did have to change the DI media a couple months prior to the rest of the filters.

6 Stage Deluxe Plus 75 GPD RO/DI System

.brs-layout { max-width: 1400px; margin: 20px auto 0; padding: 10px 0 30px; } .brs-section { margin-bottom: 34px; } .brs-section h2 { margin: 0 0 16px; font-size: 28px; line-height: 1.2; } .brs-card { border: 1px solid rgba(0,0,0,0.10); border-radius: 16px; background...

www.bulkreefsupply.com

 

[twentyleagues]

That shouldnt be an issue. I am on a well also. I do go through anion resin quite fast though, Have not been able to narrow it down as to why yet. I need to do a icp test probably. My water is very hard though. I use a brs 7 stage.

 

[Doctorgori]

That shouldnt be an issue. I am on a well also. I do go through anion resin quite fast though, Have not been able to narrow it down as to why yet. I need to do a icp test probably. My water is very hard though. I use a brs 7 stage.

yeah I think Anion goes first for most of us….so much so I use a mixed bed in one canister and just anion in the other

 

[Buckeye Hydro Verified Sponsor]

150 ppm feedwater is better than most.
Here's a test that would make sense for you. You can take the sample yourself: https://www.buckeyehydro.com/drinking-water-test/

Some of the most common well water contaminants are iron, manganese, and hydrogen sulfide.