Fluval Evo rfg
- Thread starter Bpatt
- Start date
-
- Tags
- fluval 13.5 rfg nozzle
- Tagged users None
I think the main issue is you don't have any actual Random Flow Generator® Nozzle. The RFG looks off - if you don't see "VCA", then it's not a Random Flow Generator nozzle - it's an approximation.
The other main issue is the modular hose parts are clearly 3D printed, as opposed to genuine Loc-Line modular hose.
Your best bet would be to purchase one our kit that is designed and tested to work with that tank, and includes actual Loc-Line parts for a good snug fit.
You have a few options:
You can add one of our Ultimate Nano Tank Return line upgrade kits, which his designed specifically for this tank, and is a direct-fit replacement for the stock setup.
vividcreativeaquatics.com
- or -
You can put together a single 1/2in in RFG solution as you have tried to do here. You'll need two items. the Loc-Line and the RFG
1/2in loc-line
vividcreativeaquatics.com
1/2in Random Flow Generator
vividcreativeaquatics.com
Both options are easy to install and will fit perfectly.
hope that helps.
The other main issue is the modular hose parts are clearly 3D printed, as opposed to genuine Loc-Line modular hose.
Your best bet would be to purchase one our kit that is designed and tested to work with that tank, and includes actual Loc-Line parts for a good snug fit.
You have a few options:
You can add one of our Ultimate Nano Tank Return line upgrade kits, which his designed specifically for this tank, and is a direct-fit replacement for the stock setup.
Ultimate Nano Tank Return Line Upgrade Kit – Dual 1/4in Flex-Series RFG | Vivid Creative Aquatics
vividcreativeaquatics.com
- or -
You can put together a single 1/2in in RFG solution as you have tried to do here. You'll need two items. the Loc-Line and the RFG
1/2in loc-line
Loc-Line – 1/2in modular tube – 6 knuckle segment | Vivid Creative Aquatics
vividcreativeaquatics.com
1/2in Random Flow Generator
1/2in Random Flow Generator – RFG050 (Single) | Vivid Creative Aquatics
vividcreativeaquatics.com
Both options are easy to install and will fit perfectly.
hope that helps.
Steven Garland
Valuable Member
- Joined
- Sep 10, 2016
- Messages
- 2,192
- Reaction score
- 1,501
- Location
- Sanford,Florida
- What state or country do you live in
- Florida
@Vivid Creative Aquatics I actually have the same problem with genuine 1/4" loc-line and RFG I just bought off the site. If I even touch the RFG it falls off.
Send us a DM, and we'll get you setup for a replacement ASAP.
In the meantime - try swamping the RFGs to a different segments of Loc-line. We have noticed some strange variations in the 1/4in Loc-line lately. not sure why, but it's only been recently. As a result, we have tighten up our tolerances on the 1/4in RFG and tweaked the connector to accommodate the variation.
Were in the office today as well (for at least another 2 hours) , if you want to just call in
623-233-6908
Antonio...
Took a second look at your photo today, and noticed you're in London (according to your profile) . We have a number of resellers in your local market and you should be able to find our Ultimate Nano Tank Return line upgrade kit at a local fish store or one of our U.K. based online retailers.Hi all, I am trying to replace the stock nozzle on the fluval evo13.5. have attached a 1/2" rfg nozzle but it is very loose/wobbly?
Have I attached it correctly?
You can start your search here
Where to buy the RFG Nozzle in the United Kingdom | Vivid Creative Aquatics
vividcreativeaquatics.com
Also, if you wanted to go with just the single 1/2in Random Flow Generator®, then you could actually use one of our Waterbox Flow kits (also available locally) . It includes the 2 segments of actual Loc-Line modular hose and the RFG. it also includes the Waterbox adapters, but in your case, you would not need them.
hope that helps.
