Focustronic bulk replacement parts thread (Mastertronic / Alkatronic / Dosetronic)

[socal_48]

I finally heard back from the supplier. Will update soon.

Any update?

 

[thom_smith]

I finally heard back from the supplier. Will update soon.

Bump. I don't really need 100 needles but if that's the smallest bundle you've got I'll take it. Have you got any thoughts on using a lower gauge needle for the vent so it may be less likely to clog? Higher risk of contamination doing so?

 

[sark]

Any updates?

 

[socal_48]

Has anyone found a replacement for the internal hose on the AT, MT, and DT? Other than from coralvue website.

 

[JvC]

Has anyone found a replacement for the internal hose on the AT, MT, and DT? Other than from coralvue website.

Bump - anyone know where to get Mastertronic Pump A, B, & C Inner Replacement Tube in the states? Is BRS going to stock this now that Coralvue is not?

 

[Enderg60]

Bump - anyone know where to get Mastertronic Pump A, B, & C Inner Replacement Tube in the states? Is BRS going to stock this now that Coralvue is not?

Tube Link

Get the 4.5x2.5mm and dont forget to re calibrate the pumps after.

And I highly recommend the 3d printed bushings I posted above be added when changing the tubes.

 

[DEGREGORIIS]

Hi, Anyone know where I can find the replacement white piece plastic needle guide part? Thanks.

hi, I have a 3D printer file for that...

 

[DEGREGORIIS]

Any body know what the size of the tubing is internal the pumps?

bluepumps: 2.5 x 4.5 mm

 

[malawi2854]

@Biff0rz - sorry to bother you - I was wondering if we could discuss the possibility of supply of the Mastertronic needles to the United Kingdom? Or some similar arrangement? Perhaps a branch office of "FuzzyTronic"?!
@DEGREGORIIS - I know you're somewhat more local to the UK than the US too (don't worry, not stalking you, just recognised your name from a certain Facebook group!) - not sure if this would be of any interest to you too?

 

[Biff0rz]

@Biff0rz - sorry to bother you - I was wondering if we could discuss the possibility of supply of the Mastertronic needles to the United Kingdom? Or some similar arrangement? Perhaps a branch office of "FuzzyTronic"?!
@DEGREGORIIS - I know you're somewhat more local to the UK than the US too (don't worry, not stalking you, just recognised your name from a certain Facebook group!) - not sure if this would be of any interest to you too?

I think you can buy the needles in bulk in Europe for a lot cheaper than we can in the USA. I'm waiting on the mfg to respond again, they are in China..

 

[JvC]

FYI I found the Mastertronic Pumps A,B,C are Kamoer KXF B08 pumps with 4.5x2.5mm PharMed Tubing. And I found a seller on aliexpress here

12.0US $ |Kamoer Kpp Kfs Kxf Kcp2-kxf Pump Head - Pump Replacement Parts - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

Now I just need to figure out the pump model numbers for Pump D, and the AT and DT pumps.

This is wonderful information. This entire thread is wonderful. Apparently on the FB facustronic group if you post or talk of these replacements they slap you and delete the post!

I ordered a dozen of these, they are like 8 bucks each. I have replaced 2 and they work flawlessly.

Thanks for posting, there are no replacement parts anywhere.

jvc

 

[mattuk]

Hi guys, does anybody know where I can buy rubber bushing for mastertronic stepper pump? the only supplier I can find is SeaFlower but they are not shipping to the UK anymore
I can only find the whole stepper pump and I think I only need the bushing, thank you

 

[malawi2854]

I think you can buy the needles in bulk in Europe for a lot cheaper than we can in the USA. I'm waiting on the mfg to respond again, they are in China..

Really? I have looked and looked, but I'll be danged if I can find anything. Can you provide any more detail?

Hi guys, does anybody know where I can buy rubber bushing for mastertronic stepper pump? the only supplier I can find is SeaFlower but they are not shipping to the UK anymore
I can only find the whole stepper pump and I think I only need the bushing, thank you

If you contact Aquarium Connections, they will be able to sort you out. They are the "official" distributor of Focustronic stuff in the UK. I don't think they serve the public, but they can put you in touch with someone they supply to.

Marine Aquatics (.co.uk) seem to have been a primary stockist of most Focustronic stuff - on the rare occasion I haven't been able to fashion someone up DIY... they've been my go-to place for parts.

 

[rocket098]

I have the silicone vial stoppers in packs of 12. Willing to trade for just about anything.

 

[thom_smith]

Anybody US-based need Doseteonic parts? My PCB is fried and not worth repair. I have the raspberry pi, flash card and four pumps. A fifth pump with corrosion on the back side. Parting out just to get stuff off my fish room shelves. Cheap. Message me if you need them.

 

[jelazar]

Has anyone found replacement in-line water filters? There's an earlier post with an Amazon source, but they're no longer available.

 

[socal_48]

Has anyone found replacement in-line water filters? There's an earlier post with an Amazon source, but they're no longer available.

Check this one:

 

[socal_48]

I think you can buy the needles in bulk in Europe for a lot cheaper than we can in the USA. I'm waiting on the mfg to respond again, they are in China..

Any update on the needles?

 

[kenchilada]

Is there a list somewhere of parts that have bulk alternatives? Big thread to dig through. Trying to decide if I want to buy a mastertronic or if it’s just a bad idea right now.

 

[mudbugmike]

Is there a list somewhere of parts that have bulk alternatives? Big thread to dig through. Trying to decide if I want to buy a mastertronic or if it’s just a bad idea right now.

I have one and am looking for the same. Needles are still not easy to find. I bought the punch and sheet from the earlier pages but am still waiting on the silicone mat.. that's actually not the easiest to find either. Looks like it ships from china.