WhatCouldGoWrong71
Valuable Member
- Joined
- May 19, 2023
- Messages
- 1,475
- Reaction score
- 882
- Location
- Memphis
- What state or country do you live in
- Tennessee
First - I am trying to buy a Zoo Med low boy and I am striking out. None of their dealers in my area stock them (all petco's). Where are you guys getting them?
Next - I want to plumb this into my matured RS Max 500. I run two return pumps, a M2 from the sump to the display running through a UV, typically very very low flow. And a S2 that utilizes the OEM sump return set up.
This setup is temporary (6 months) until I can move this into a fish room that is being developed. I have a new tank that is 30 day out of the dark cure and I want to start gather coral for when I am ready to load that tank up (3-5 months).
I don't want to use the chiller connection (if you are familiar with this tank) that the S2 is plumbed too. My thoughts are to put a T in front of the UV with a gate vale to the UV to tune that flow down and tune the overall M2 flow to what I want to the frag tank. IF something happened where I need to crank the flow up through the UV, I would switch the gate valve over to the frag line and tune respectively.
I have never ran two tanks off one sump. I do have auto dosing, so I would have to adjust that. What else should I think through. The extra 50 gallons will tax my current heater set up, should I add a second heater setup to the system? Should the placement be the sump or frag tank? Thank you in advance for the read...
Next - I want to plumb this into my matured RS Max 500. I run two return pumps, a M2 from the sump to the display running through a UV, typically very very low flow. And a S2 that utilizes the OEM sump return set up.
This setup is temporary (6 months) until I can move this into a fish room that is being developed. I have a new tank that is 30 day out of the dark cure and I want to start gather coral for when I am ready to load that tank up (3-5 months).
I don't want to use the chiller connection (if you are familiar with this tank) that the S2 is plumbed too. My thoughts are to put a T in front of the UV with a gate vale to the UV to tune that flow down and tune the overall M2 flow to what I want to the frag tank. IF something happened where I need to crank the flow up through the UV, I would switch the gate valve over to the frag line and tune respectively.
I have never ran two tanks off one sump. I do have auto dosing, so I would have to adjust that. What else should I think through. The extra 50 gallons will tax my current heater set up, should I add a second heater setup to the system? Should the placement be the sump or frag tank? Thank you in advance for the read...
