jedimasterben
Bubble coral sting good
Hey, got a few things I need to get rid of. Prices include shipping charges, either via USPS or UPS at my discretion.
2x Tunze 6095 - $225 each
Rated at 2,510GPH each, these things are beasts. Run them on a controller (either Tunze or a 0-10v reef controller) or at constant mode using the 12-24v chips (lower voltage equals lower output, 12v is 50% speed, etc). Used for a few months.
1x Tunze 7096 controller - $140
Controls up to four Tunze powerheads. Programmable via USB, and includes four Tunze cords and the USB programming cord. Used for a couple of months.
Buy both powerheads and the controller for $550
Two Little Fishies Kalkwasser Reactor 300 - $50
Use with a 200-300GPH pump to be able to use properly. Good for ATO with kalk, or to run on a timer to deliver a specific dose of saturated kalk water to match your tank's needs. New, unused.
Two Little Fishies Phosban Reactor 550 - $45
This is the big boy. I was going to use it to hold Seachem deNitrate media as a denitrator, but it is no longer necessary. Comes with over a liter of the deNitrate media, free if you want it. New, unused.
2x Nano tank LED fixtures - $280 each
A 6" MakersLED heatsink packed with Luxeon Rebel/ES and LEDGroupBuy custom HV. 6x 5000k neutral white, 12x 445nm royal blue, 1x OCW, and 4x HV. Manual dimming or 0-10v on the two separate drive channels. One channel has the NW and OCW, the other channel has the RB and HV. Comes with 40 degree lenses on the NW/RB/HV, and no lens on the OCW. Comes with the MakersLED hanging kit, a power supply for the fan, and an 8' cord from the heatsink to the two drivers (which then have another 3ft to the wall) and the fan power supply. Will be available to ship after next weekend, barring any shipping delays on the last part I'm expecting for these.
I'm only looking for THREE MP10wES as trade.
2x Tunze 6095 - $225 each
Rated at 2,510GPH each, these things are beasts. Run them on a controller (either Tunze or a 0-10v reef controller) or at constant mode using the 12-24v chips (lower voltage equals lower output, 12v is 50% speed, etc). Used for a few months.
1x Tunze 7096 controller - $140
Controls up to four Tunze powerheads. Programmable via USB, and includes four Tunze cords and the USB programming cord. Used for a couple of months.
Buy both powerheads and the controller for $550
Two Little Fishies Kalkwasser Reactor 300 - $50
Use with a 200-300GPH pump to be able to use properly. Good for ATO with kalk, or to run on a timer to deliver a specific dose of saturated kalk water to match your tank's needs. New, unused.
Two Little Fishies Phosban Reactor 550 - $45
This is the big boy. I was going to use it to hold Seachem deNitrate media as a denitrator, but it is no longer necessary. Comes with over a liter of the deNitrate media, free if you want it. New, unused.
2x Nano tank LED fixtures - $280 each
A 6" MakersLED heatsink packed with Luxeon Rebel/ES and LEDGroupBuy custom HV. 6x 5000k neutral white, 12x 445nm royal blue, 1x OCW, and 4x HV. Manual dimming or 0-10v on the two separate drive channels. One channel has the NW and OCW, the other channel has the RB and HV. Comes with 40 degree lenses on the NW/RB/HV, and no lens on the OCW. Comes with the MakersLED hanging kit, a power supply for the fan, and an 8' cord from the heatsink to the two drivers (which then have another 3ft to the wall) and the fan power supply. Will be available to ship after next weekend, barring any shipping delays on the last part I'm expecting for these.
I'm only looking for THREE MP10wES as trade.
