Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It is a 12mm glass aquarium from SCA. And yes this is at a business!What kind of tank is it? (I assume this is at a business)
Yes that is what I have read too. I’m not too worried about the outer seam. But the middle of the silicone has a weird cut-like injury with air traped on the insideSo from what I have read ... the bead around the inside of the tank is more decorative.. what the concern is .. if its start to creep into the glass on glass seal. That is what happened to mine..Millage may very. hopefully others chime in.
You can find reasonably cheap water detection sensors on Amazon. It might be worth spending a few dollars on one to give you advance warning if anything starts happening (in theory you'd get a leak as opposed to the entire tank going), and as it's in a business you probably wouldn't want to walk into 150 gallons of water first thing in the morning...It is a 12mm glass aquarium from SCA. And yes this is at a business!
Ya hard to tell from the pic... visually with mine I could see tiny copepods in between things they should not have been in between :/Yes that is what I have read too. I’m not too worried about the outer seam. But the middle of the silicone has a weird cut-like injury with air traped on the inside
That would be very bad but indeed… thank you for your recommendationYou can find reasonably cheap water detection sensors on Amazon. It might be worth spending a few dollars on one to give you advance warning if anything starts happening (in theory you'd get a leak as opposed to the entire tank going), and as it's in a business you probably wouldn't want to walk into 150 gallons of water first thing in the morning...
I had seen copepods get stuck in between my overflow silicone seams. While the over all construction of the tank is well done, they did do a poor job on the overflow silicone and that one particular spot that I had post on about.Ya hard to tell from the pic... visually with mine I could see tiny copepods in between things they should not have been in between :/
For my reference.. they were in the Glass to Glass seam.. that, for me was enough to switch tanks.I had seen copepods get stuck in between my overflow silicone seams. While the over all construction of the tank is well done, they did do a poor job on the overflow silicone and that one particular spot that I had post on about.


