Gasman's(Bob) 110 REbuild

Gasman · Aug 30, 2015

It's taken me forever to build but, the tank is finally wet. Thanks everyone!!!!!!!

s2nhle · Aug 30, 2015

Wow, Very great thread. Thank you for sharing. where did you buy the dosing jugs?

Gasman · Aug 31, 2015

s2nhle said:
Wow, Very great thread. Thank you for sharing. where did you buy the dosing jugs?

Thanks. If I remember right, the jugs came from Bulk Reef Supply here in Minnesota. I had to drill the caps out for the tubing. If you go with these jugs and drill the caps......be careful. The caps are hard plastic and like to splinter. I found light pressure and a slow drill speed worked best.

Jug:
http://www.bulkreefsupply.com/space-saver-jug-thin-4-liter-1-05-gallon.html

s2nhle · Aug 31, 2015

thank you very much. Let me check with BRS for them.

Gasman · Oct 30, 2015

Some fish.....Finally!!!!!

Gasman · Apr 14, 2016

I added 2 brackets to hold the reactors over the sump instead of mount them to the wall. Now the water STAYS IN THE SUMP, not down the wall......when changing media. I also was able to add 2 more reactors. I now have 2 carbon, 1 GFO and 1 had a pleated sediment filter. Will see how this set up works now.

............And here's my tank helper in action!

s2nhle · Apr 15, 2016

Looking great. Thank you for sharing.

revhtree · Apr 15, 2016

Good job!

Gasman · Apr 15, 2016

THANKS!!

ludnix · Apr 15, 2016

Beautiful setup! I love the reactor mounts you added, I think anyone with that style reactor has spilt water all over whatever it's mounted to, that's a great simple way to keep things in the system!

s2nhle · Apr 18, 2016

ludnix said:
Beautiful setup! I love the reactor mounts you added, I think anyone with that style reactor has spilt water all over whatever it's mounted to, that's a great simple way to keep things in the system!

+1 indeed. Very creative. is that waterproof metal?

Gasman · Apr 25, 2016

s2nhle said:
+1 indeed. Very creative. is that waterproof metal?

Everything is aluminum, except these brackets and the canopy lift. I have 6 coats of paint on the brackets, many more on the lift structure.

s2nhle · Apr 26, 2016

Very well planning.

Gasman · Nov 1, 2018

Nice to see Photobucket is letting the pictures come through again,,,,

Gasman · Dec 7, 2019

I have been having issues with the MP40 drivers turning completely off, erratically. I have to cycle the power and sometimes pair them to the Apex WXM module to get them to work again. I've tried resetting the driver but, still have the same problem. Any Ideas? I've already tried a new WXM module and updated it.