GE silicone 1 window and door - 48 hour cure safe?

  • Thread starter Thread starter Drewe
  • Start date Start date
  • Tagged users None

Drewe

Active Member
View Badges
Joined
Nov 27, 2018
Messages
163
Reaction score
131
Location
Richmond, Virginia
What state or country do you live in
Virginia
Rating - 0%
0   0   0
My sump leaked so I tossed it on Sunday and bought another 40b to replace it at the dollar per gallon sale.

I installed the new baffles on Sunday around 1pm, it's only 4 baffles total. Is it safe to install the new sump? This was my first usage of silicone in all my years of reef keeping.

I used GE 1 Window and Door, the blue/white tube that doesn't mention mold/mildew and is FDA approved for food contact.

It doesn't smell of vinegar anymore, what do you guys think?

The reason I'm in somewhat of a hurry is because my BTA didn't like the change in flow after the return pump had been off since Saturday and he took a walk and sat on a few of my SPS, killing a few colonies and he's still walking around so I'd like to get the flow back to normal ASAP.
 
Hey @Drewe - 48 hours should be a suitable time for curing providing that the silicone is not exceptionally thick. If it is thick, I'd recommend 72 hours, minimally.

Below is an article that is a little lengthy but definitely informative and worth the read. The author mentions a number of different silicones for aquarium use. However, he does not mention one that I, and many others, have been using for years with great success, which is ASI. You will find a link to the ASI company under the article link.

Hope all of this helps for any future projects!

https://www.aquarium-pond-answers.com/2007/03/aquarium-silicone.html

https://www.americansealantsinc.com/asi-aquarium-sealant/
 
Hey @Drewe - 48 hours should be a suitable time for curing providing that the silicone is not exceptionally thick. If it is thick, I'd recommend 72 hours, minimally.

Below is an article that is a little lengthy but definitely informative and worth the read. The author mentions a number of different silicones for aquarium use. However, he does not mention one that I, and many others, have been using for years with great success, which is ASI. You will find a link to the ASI company under the article link.

Hope all of this helps for any future projects!

https://www.aquarium-pond-answers.com/2007/03/aquarium-silicone.html

https://www.americansealantsinc.com/asi-aquarium-sealant/
@crusso1993 thank you very much! I'm not sure on the thickness as I don't have much to compare it to. If I had to guess the thickest bead is 1/4inch.

I'll wait until tomorrow or Thursday just to be safe, thank you!
 
If it were me, id wait a week to be safe. Better to be safe than sorry. Silicone can be decieving, the outside cures first and moisture in the air is what causes the cure. It can appear fully cured but the inside of the bead may not be.
One trick is to lay a test bead same size as the beads on you baffles on a scrap piece of cardboard. And keep it near the aquarium thats curing Cut that bead open to check if its fully cured.
 
I would wait 5-7 days as a happy medium. I just did some silicone work. I was going to wait 2 weeks when someone suggested a week was sufficient.
The data sheet from momentum(SCS1200) says "cures" in 24 hours, "full cures" in 5-7 days for most applications. This was for under 1/4" I think.

With 7 days cure I figured I was OK because the silicone was thin and these were just baffle type projects, not tank construction. So far things seem to be OK.

If I was building a tank I would wait 2 weeks, because I assume aquariums don't fall under the "most applications" category mentioned in the datasheet.
 
I typically give it 2-3 days, you will notice the strong smell goes away when it is cured
 
Uncleof6 Silicone Adhesive


For the record: All silicones are reef safe-once they are fully cured. The enemy is uncured silicone, not some mythical ingredient for controlling mildew.


That said, GE Silicone I is cheap junk. It is the aboslute barrel bottom of all materials (and many silicones are right there with it.) For our projects we really should move up to a higher quality product. Dow Corning makes several that blow GE Silicone away, but are not as hefty as the RTV100 series or SCS1200, however for small projects they are fine. DC 735, DC 999A to name two.

The MSDS for Silicone II does not indicate that there are any additions other than siloxanes, of which there are literally hundreds, (polymers) common to all silicones, without getting to complicated about it, The MSDS also does not indicate any proprietary additives either. Where such is present, the law requires that they be included in the MSDS. This raises serious questions as to the validity of the advertising.

What differentiates Silicone II from Silicone I is the latter is an acetoxy cure silicone, and the former is a neutral cure silicone.

Silicone II does not take longer to cure; published cure times are about the same. However the cure times pertain to a specific amount of silicone, usually given in a bead size, generally 1/8" or 1/4". Hardly have I ever seen an aquarium application use that little. As the amount increases the cure time increases, a week, two weeks...RTV100 series' 7 day full cure time is for a 1/4" bead!

I would say that neutral cure silicone is a bit more toxic in its "uncured" state than acetoxy cure silicone, but that is as far as it goes. It is better to malign a product for what it does not do well, rather than internet rumor.

Acetoxy cure silicone excels at bonding to glass and ceramics; acetic acid is corrosive, so it is not suited for metals, and it does not bond well to other materials (acrylic included.) Neutral cure excels at bonding metals (non-corrosive) and other materials (acrylic not included.)

Co-polymers, are another category (not 100% silicone) and are out of the scope of this thread.

Within the two general categories, there are several sub-categories: sealant, adhesive, high temperature, etc. Obviously we are only concerned with sealants and adhesives. the choice of which to use, really takes little thought. Sealants seal, adhsives hold stuff together.

GE Silicone I (Momentive) is, easy to work with, but is a bargain basement low end sealant. RTV100 series (Momentive) or SCS1200 (Momentive) are high end adhesives, not so easy to work with. In between there is a plethora of formulations, that will drive the most studious nuts ( I am a prime example.)

A short list has been publised at least a 100 times here on RC, not that they are the only choices, but everytime some off the wall silicone is asked about, or mentioned, it just adds to the confusion (and rumors.) In similar fashion "what is safe and unsafe" has been published at least the same number of times, over the past several years, here on RC.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top