General Use Reverse Osmosis Device bypass after stage 5.

Rohirrimus

Active Member
View Badges
Joined
May 10, 2022
Messages
158
Reaction score
55
Location
Malta
What state or country do you live in
Other International
Rating - 0%
0   0   0
Hello guys,
Due to limited space and budget I want to get 1 device to use as both kitchen and Aquarium Reverse Osmosis.
My idea is to get a 7 stage device like this:
Screenshot 2023-03-31 at 18.01.14.png

Which essentially Purifies for 5 stages, and then has 2 stages of putting back minerals into the water (for drinking).

I want to do some sort of bypass after stage 5 where I can when required for the aquarium use it with just 5 stages (purification).
Did anyone do something similar in their homes? Thanks
 
Do you have a stage diagram?

Like how many DI stages?

What i would do is plumb the remineralization cartridges into the 3rd port of a DI bypass valve (3 way ball valve) into the effluent product water of the RO membrane.


Then the RO goes through the remineralization cartridges into a container of your choice for drinking when in the bypass position, and to your DI cartridge for aquarium When the valve is switched to flow inline.
 
Do you have a stage diagram?

Like how many DI stages?

What i would do is plumb the remineralization cartridges into the 3rd port of a DI bypass valve (3 way ball valve) into the effluent product water of the RO membrane.


Then the RO goes through the remineralization cartridges into a container of your choice for drinking when in the bypass position, and to your DI cartridge for aquarium When the valve is switched to flow inline.
That's the adapter I've been looking for. Thanks
 
I actually put a tee after the ro membrane and ran a line from the tee into a check valve then to the final cartridges for the fridge/drinking water. No need to worry about moving the valve. Hope that helps. The check valve stops any backflow from the final cartridges.
 
I actually put a tee after the ro membrane and ran a line from the tee into a check valve then to the final cartridges for the fridge/drinking water. No need to worry about moving the valve. Hope that helps. The check valve stops any backflow from the final cartridges.
How would this work if he wants to use deionized water for his tank?
 
I actually put a tee after the ro membrane and ran a line from the tee into a check valve then to the final cartridges for the fridge/drinking water. No need to worry about moving the valve. Hope that helps. The check valve stops any backflow from the final cartridges.
This is exactly what I did before the DI cartridge. I ran a T to my pressurized water tank and a check valve. This way when I need DI for the tank, no valves to switch or anything. The 5 gallon pressurized RO container just gets RO water. That pressurized container runs throughout the house including a pressurized pump to pump RO water to the fridge and Ice Maker in the fridge as well as to an Ice maker in the basement and drinking faucet in the basement. It's been in use for 6 years now with no issues. No switches and no leaks.
 
This is exactly what I did before the DI cartridge. I ran a T to my pressurized water tank and a check valve. This way when I need DI for the tank, no valves to switch or anything. The 5 gallon pressurized RO container just gets RO water. That pressurized container runs throughout the house including a pressurized pump to pump RO water to the fridge and Ice Maker in the fridge as well as to an Ice maker in the basement and drinking faucet in the basement. It's been in use for 6 years now with no issues. No switches and no leaks.
I get it now. Thanks for clarifying.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top