GFCI with a UPS

[Snoopdog]

Has anything used a wall GFCI with a UPS? My big question is will the GFCI flip when there is a fault on something like a pump? I just wonder if the UPS will stop the GFCI from flipping since the UPS definitely does power conditioning as far as I know. My worry is a bare copper wire sizzling in the tank if insulation breaks, spilling copper in the water. Sure the GFCI would flip but the UPS would still be providing power for hours.

 

[paragrouper]

What I do know: there is a history of UPS tripping GFCI’s.

the link below discusses such.

Use of Smart-UPS and Back-UPS with GFI (GFCI) Receptacles or Breakers | Schneider Electric USA

www.apc.com

I suspect you may want to address your issue with the UPS manufacturer before you select a model.

 

[Snoopdog]

What I do know: there is a history of UPS tripping GFCI’s.

the link below discusses such.

Use of Smart-UPS and Back-UPS with GFI (GFCI) Receptacles or Breakers | Schneider Electric USA

www.apc.com

I suspect you may want to address your issue with the UPS manufacturer before you select a model.

I have never had a UPS flip a GFCI. Address what issue? I am not having an issue I am just wondering if a UPS will stop the GFCI from flipping when there is a fault.

 

[paragrouper]

I have never had a UPS flip a GFCI. Address what issue? I am not having an issue I am just wondering if a UPS will stop the GFCI from flipping when there is a fault.

From my understanding, it will not. The issue I see is whether the ups will shut down in the presence of a fault, or continue to supply power to the faulty load.

 

[Snoopdog]

From my understanding, it will not. The issue I see is whether the ups will shut down in the presence of a fault, or continue to supply power to the faulty load.

I also just found this thread talking about it.

GFCI false trip with UPS - Is there a better way to do this?

I am currently using a CyperPower PFC Sinewave UPS with two GFCI cords connecting my Apex energy bars to the UPS. For the second time in two months I've had the whole thing go down, both GFCI cords tripping simultaneously. Particularly given that there isn't even any equipment connected to the...

www.reef2reef.com

The article examines gfci upstream of ups. But my understanding is this nulls the gfci effectiveness as ups isolates power.
So you want the gfci after the ups.
The filtering that causes the trips may be on both sides of the ups.

What you linked in your first response is mentioned in that thread, so my apologies.

 

[Snoopdog]

Like I said, never had a problem with my UPS flipping the GFCI but I also do not want the UPS providing power to device that is leaking voltage. I mean the GFCI could do it's job and flip but power is still provided via the UPS, unlikely but unlikely has happened to me recently. I am not sure what the solution is other than to put the GFCI past the UPS but that would mean two, one of the devices on the battery side and one on the non-battery side.