GHL Control Center - English

GJak · Oct 14, 2019

Can anyone point me to an english version of GHL control center? GHL's link to the english page is down and every version i can find and install is in German.

porter_painter · Oct 14, 2019

I’m pretty sure that the first option when you open the software is to pick your language.

lmm1967 · Oct 14, 2019

GHL Control Center V1.1.2.9 – GHL (International)

PC software (Windows Vista, 7, 8, 10), suitable for these devices: Mitras LX6 up to firmware 1.21 Mitras LX7 up to firmware 1.10 GHL Doser 2 SA & Maxi up to firmware 1.35 ProfiLux 3 & 3.1 with firmware 6.00 to 6.43 ProfiLux 4 with firmware 7.00 to 7.23 ProfiLux Light/Mini (WiFi) up to firmware...

www.aquariumcomputer.com

GJak · Oct 14, 2019

porter_painter said:
I’m pretty sure that the first option when you open the software is to pick your language.

Yeah there is during the install, I pick English and it installs in German every time

AZMSGT · Oct 15, 2019

lmm1967 said:
GHL Control Center V1.1.2.9 – GHL (International)

PC software (Windows Vista, 7, 8, 10), suitable for these devices: Mitras LX6 up to firmware 1.21 Mitras LX7 up to firmware 1.10 GHL Doser 2 SA & Maxi up to firmware 1.35 ProfiLux 3 & 3.1 with firmware 6.00 to 6.43 ProfiLux 4 with firmware 7.00 to 7.23 ProfiLux Light/Mini (WiFi) up to firmware...

www.aquariumcomputer.com

GJak said:
Yeah there is during the install, I pick English and it installs in German every time

@Vinny@GHLUSA @Support@GHLUSA @Ditto

One of those guys might be able to help.

However, In your case I would try the new 1.1.3.0 beta version.

GHL Control Center V1.1.3.1 – GHL (International)

PC software (Windows Vista, 7, 8, 10), suitable for these devices: Mitras LX6 up to firmware 1.21 Mitras LX7 up to firmware 1.11 GHL Doser 2 SA & Maxi up to firmware 1.35 ProfiLux 3 & 3.1 with firmware 6.00 to 6.43 ProfiLux 4 with firmware 7.00 to 7.23 ProfiLux Light/Mini (WiFi) up to firmware...

www.aquariumcomputer.com

GJak · Oct 25, 2019

Bump anyone help me out with this?

Tried beta version, still loads in german after selecting install language english.

AZMSGT · Oct 25, 2019

Look at this article and see if it fixes your problem

How to change default installation language

Each time i install programs, it is always done in chinese. How do i change the default langugage which all programs are installed in such that after the installation, the program will be in english.

answers.microsoft.com

ingchr1 · Oct 26, 2019

Make sure you are launching the version of GCC you just installed. Maybe you are launching an old version that installed in German?

When GCC installs, it installs a complete new program of that version. It doesn't update the version you have installed. If you go into your installed programs list, you will see all the versions there. You can uninstall all the old versions. Maybe uninstall them all, then reinstall the latest version to see if that fixes the problem.

GJak · Oct 26, 2019

ingchr1 said:
Make sure you are launching the version of GCC you just installed. Maybe you are launching an old version that installed in German?

When GCC installs, it installs a complete new program of that version. It doesn't update the version you have installed. If you go into your installed programs list, you will see all the versions there. You can uninstall all the old versions. Maybe uninstall them all, then reinstall the latest version to see if that fixes the problem.

I've tried everything, uninstalling the other versions before installing the others included. All in German. Thought maybe there was a language file it was somehow automatically picking up on so I rolled back my hard drive to before j installed any of them and even that did not work.

JasonC80 · Oct 27, 2019

If you have the german version installed, this is the sequence of clicks in the program to switch to english

Ansicht > Sprache > Englisch > Ok > Ok

Then restart the program.

GJak · Oct 28, 2019

JasonC80 said:
If you have the german version installed, this is the sequence of clicks in the program to switch to english

Ansicht > Sprache > Englisch > Ok > Ok

Then restart the program.

This looks like the answer but it doesn't apply the settings. I can select English and then a German prompt comes up with what I'm assuming is telling me to restart the program. If I close it and reopen it, it is back to German. Is there a way to save the settings or something before closing it? I never actually get the English version to load so I can't read the menus.

porter_painter · Oct 28, 2019

Try picking German and see if you get English

Thorne Jamieson · Oct 28, 2019

I have this too. I think there is a GHL acknowledged fault with the latest version 1.1.3 of Control Center. Something to do with the Visual Basic version used to compile it. The fix - I believe - is to wait for the next version coming soon.

Thorne

GJak · Oct 28, 2019

Thorne Jamieson said:
I have this too. I think there is a GHL acknowledged fault with the latest version 1.1.3 of Control Center. Something to do with the Visual Basic version used to compile it. The fix - I believe - is to wait for the next version coming soon.

Thorne

There are two downloadable versions and a third as the upcoming Beta version. All 3 install in German for me. So if the Beta is supposed to be their fix to an acknowledged problem I don't have faith in the next update.