Going crazy from ATK notifications
- Thread starter CSJIII
- Start date
- Tagged users None
DarthSimon
Team R2R
- Joined
- May 29, 2017
- Messages
- 2,318
- Reaction score
- 3,843
Is something making your water line that is resting on the low water line sensor fluctuate up and down? Is water turbulent in your Sump?
DarthSimon
Team R2R
- Joined
- May 29, 2017
- Messages
- 2,318
- Reaction score
- 3,843
OP
OP
CSJIII
Well-Known Member
It’s on the return area of my sump and it’s not turbulent. After much tweaking I got the ATK to work and the water stays stable at my set point. Is it’s Apex way of telling me it’s working? Cause I can’t stand the constant notifications
DarthSimon
Team R2R
- Joined
- May 29, 2017
- Messages
- 2,318
- Reaction score
- 3,843
Unless your sensors are dirty, which I doubt, (salt builds crust on sensor and closes it)... Sounds like this is a new ATK, those alarms were going off because those “If” statements were becoming true. Something may have been raising and lowering your water line that sits on the low sensor.
OP
OP
CSJIII
Well-Known Member
It is not. It’s about 1/2” lower than my center chamber.
yes the anti siphon is on per the directions.
DarthSimon
Team R2R
- Joined
- May 29, 2017
- Messages
- 2,318
- Reaction score
- 3,843
Contact Support
TO CONTACT NEPTUNE SYSTEMS SUPPORT, FOLLOW THESE STEPS and Fill out the To Contact Support Form: Find the the serial number of your system Via the display screen> Self Test Via Apex Fusion> Apex List/Selection Visit www.ApexFusion.com and please add "neptunesupport" with "manager...
www.neptunesystems.com
Crashnt24
Well-Known Member
Turn that off, or change the configuration to remove any ATK related "IF then ON" statements in the text alarm outlet.
I personally leave it off. The only reason I would use a text alarm is for anything I would need to leave work early for. Like temperature below 75 degrees or a floor leak sensor.
Last edited:
Mical
2500 Club Member
I had a similar issue a couple years ago when the ATK first came out and I moved the return line from the ATK holder to another chamber. The pump flow was causing turbulence triggering alarms. You do lose the redundancy of the float shut off.
My ATK return(s) are in the center/skimmer sections of both of my sump(s).
Mspitz2
New Member
are you still having the same issue if so what did you do to solve it because i'm having the same problemI can’t stand it anymore! My ATK sends me constant notifications at all hours of the day. Like sometimes 6 in a row at 3 am! How do I stop this?
