Kiwi reefer
Valuable Member
- Joined
- Nov 24, 2019
- Messages
- 1,526
- Reaction score
- 6,789
- Location
- New Zealand
- What state or country do you live in
- Other International
Welcome! looking forward to seeing your reef!
Jimbhoy13
7500 Club Member
- Joined
- Sep 29, 2018
- Messages
- 9,323
- Reaction score
- 68,675
- Location
- Derbyshire
- What state or country do you live in
- Other International
Welcome to R2R and the salty world. Looks like you have good plans in place and starting well. Lots of knowledgeable and helpful people here who will support and advise you when needed.
Patientman
Well-Known Member
- Joined
- Oct 25, 2007
- Messages
- 545
- Reaction score
- 2,390
- Location
- Bel Air, MD
- What state or country do you live in
- Maryland
Welcome aboard! Very well thought out … and I'd say having a good plan(as you do) is a large part to having a successful tank! Folks here will definitely be able to advise you on any questions or concerns you may have! Please do keep us posted on the progress!
Fish Think Pink
5000 Club Member
Welcome!Hello everyone. I’m brand new to the hobby. I’m currently working on setting up a tank. I have a 40 gallon breeder that was drilled by the local shop for drain and return (I’m not sure what the technical terms are.) I’ve also purchased another 40 gallon breeder that I’ll be using to make a sump.
I’ll be making stands for both this weekend, most likely. I’m a paraplegic, so in order for me to reach everywhere I need to reach it’s not practical to put the sump under the main tank, because it would be too high. So, I’m going to place them side by side with the sump lower. It may not look as nice, but I’ll be able to reach everything.
I’ll attempt to attach a picture of the sump build I’ll be modeling. I’m sure all of you can already tell by looking at it, but just in case (from right to left in the pic) The water flows down into a sock filter with the protein skimmer next to it, then the water pours over a bubble trap leading into the area with the return pump, leaving the refugium at the end. The return pump will send water to the tank as well as to the refugium.
This is the model the guy at the local shop recommended. If anyone has suggestions otherwise I’m open to them.
For a skimmer I’m thinking reef octopus 110, and for return pump Sicce 2.0
From what I’ve read so far those are solid choices. I’m open to other suggestions, especially if I can find high quality options and save money.
I could use suggestions on lighting, in tank circulation and anything else that comes to mind.
I’d like to eventually try my hand at both lps and sps. As far as fish, I know I want a pair of clowns. From there I would just like to get whatever I can to make the tank look great. As many different colors as possible at different levels of the tank.
I’ll end with saying anything that will save me money without sacrificing too much quality is ideal.
That looks great and seems like you have solid plan. There are so many 'right' options so I'll defer to others. BRS has some good videos. I've also been able to find some equipment thru local fish club which saved me some money.
Local Reef Club Discussion
Looking for some locals to share frags and info with? This is the place! Find a local club that meets in your area! If you want to add your club just contact us.
www.reef2reef.com
Fish Think Pink
5000 Club Member
sump has 3 chambers so perhaps there is room for refugium +1 vote refugium
KyleyBob
New Member
- Joined
- Apr 13, 2021
- Messages
- 14
- Reaction score
- 57
- Location
- Blue Springs
- What state or country do you live in
- Missouri
Yes, it’s going to have one one the far end. I got the glass cut today.
BeltedCoyote
Philosopher king of the Memes
- Joined
- Aug 11, 2019
- Messages
- 7,425
- Reaction score
- 36,786
Welcome to R2R!!!
BaysEndReef
Anthony
KyleyBob
New Member
- Joined
- Apr 13, 2021
- Messages
- 14
- Reaction score
- 57
- Location
- Blue Springs
- What state or country do you live in
- Missouri
I got most of the stands built. Now I just need some support beams in each corner. The stand for the aquarium is 28 inches high making the total hight around 45 inches, just enough room for me to reach around. The sump stand is 20 inches. That should let gravity do it’s job. I’ve got the glass and silicone, so next up is getting the sump squared away.
Attachments
Poof No Eyebrows
Valuable Member
- Joined
- Feb 4, 2020
- Messages
- 1,599
- Reaction score
- 8,961
- What state or country do you live in
- Tennessee
Welcome
Manny’s Reef
2500 Club Member
- Joined
- Nov 27, 2020
- Messages
- 3,072
- Reaction score
- 8,933
- Location
- West Jordan
- What state or country do you live in
- Utah
Hello and welcome to R2R. We are glad to have you.
