Hanna Calcium checker TEST

[hyeclass]

My calcium is very high
I took .9 using the green ejector Reagent
I took .7 using white ejector tang water

Reagent plus RODI water to the line
Test
Then add tang water plus packet
Test

not sure I been testing seems like it’s high

 

[highest_tides]

C1:

1 ml of Reagent A
9 ml of Ro/DI water
Invert a few times and press button

C2:

.1 ml of your sample
add packet
shake for 15 seconds and let sit for 15 seconds
press button

 

[WIReefer]

From what I’ve witnessed the Hanna calcium checkers are not all that accurate I’m a huge fan of Hanna and have a sort of them Just not calcium hope this helps. When I used it readings would be not accurate false readings. Hope this helps.

 

[hllb]

There is a special pipette for that tester to measure out the .1ml sample. Even with that, it usually runs high for me. I quit using it. Hanna also recommends using vapor distilled water rather than RODI water.

 

[hyeclass]

C1:

1 ml of Reagent A
9 ml of Ro/DI water
Invert a few times and press button

C2:

.1 ml of your sample
add packet
shake for 15 seconds and let sit for 15 seconds
press button

this is the only check by Hanna that you have to add RODI water
I am testing again let’s see if this time will be different

thank you