Hanna or Milwaukee?

[Nhjmc]

I'm finally biting the bullet and ordering a digital (seawater) refractometer but can't decide which one to buy Hanna HI-98319 or the Milwaukee MA887. Read some older posts on here on same subject but want to hear what people think/are using now vs. then Thanks all!

 

[Ron Reefman]

My personal opinion is, that unless you have really delicate corals or critters in your tank, stability with salinity is way more important than an exact number. I have a refractometer and I never use it anymore. I check with a hydrometer that I calibrated with the refractometer. In over 6 or 7 years it's never changed. I calibrate the refractometer, measure my water's salinity, test again with the hydrometer and see the difference. My hydrometer has read 0.005 too low. So when it says 1.021 I add 0.005 and I'm at 1.026. It's been that way for years and never changes. I'm a happy camper.

 

[Nhjmc]

Cool thank you for your sharing that. I rather not spend the $100 on a digital refractometer just want to be 100% certain my salinity is right and stable. I do have a hydrometer and a refractometer (ATC) I got off amazon. I don't use the hydrometer much it's just a cheap instant ocean hydrometer. I did purchase the calibration fluid and have been calibrating it every few times I use it which is pretty often because I'm having an issue tuning in/placing ATO sensor in correct place so I've been OCD about testing my salinity lately.

 

[raylinds]

I have been using the Milwaukee for about a year now and love it. I regularly check it with the included calibration fluids and it is consistently reliable.

 

[Nhjmc]

thank you

 

[Randy Holmes-Farley Verified Community Expert]

Um.... Hanna does not make a refractometer (edit: they do sell one)

What you mention is a conductivity meter. Works entirely differently.

There are many good brands of conductivity meters and I prefer them to refractometers, at least good conductivity meters.

 

[ReefLab]

Um.... Hanna does not make a refractometer.

What you mention is a conductivity meter. Works entirely differently.

There are many good brands of conductivity meters and I prefer them to refractometers, at least good conductivity meters.

https://www.saltwateraquarium.com/d...yFBBF6Bz3UvFMwTthSTAvte8UKBbqDdoaAlaXEALw_wcB

fwiw I recommend getting a conductivity meter as well. pinpoint marine is the one I use.

 

[Randy Holmes-Farley Verified Community Expert]

https://www.saltwateraquarium.com/d...yFBBF6Bz3UvFMwTthSTAvte8UKBbqDdoaAlaXEALw_wcB

fwiw I recommend getting a conductivity meter as well. pinpoint marine is the one I use.

OK, there is one, my mistake.

But that's not apparently what the OP is asking about? He says

" but can't decide which one to buy Hanna HI-98319 or the Milwaukee MA887. "

The HI-98319 is a conductivity meter:

Marine Salinity Tester

Hanna Instruments HI98319 Marine Salinity Tester measures conductivity (EC) to determine the salinity of natural and artificial seawater within seconds.

www.hannainst.com

 

[minus9]

Honestly, I'm with Randy here, nothing beats a good ole seawater refractometer. In fact, I just ordered the Tropic Marin glass hydrometer to compliment my D&D refractometer. Btw, I just got back from my LFS where they have both of the digital refractometers you're asking about and the Hanna was the closest to my trusted refractometer. The Milwaukee was way off. Btw, I never trust just one device, but if I did, it would be my refracometer (and not a digital one).
Just my two pennies.

 

[ReefLab]

Honestly, I'm with Randy here, nothing beats a good ole seawater refractometer. In fact, I just ordered the Tropic Marin glass hydrometer to compliment my D&D refractometer. Btw, I just got back from my LFS where they have both of the digital refractometers you're asking about and the Hanna was the closest to my trusted refractometer. The Milwaukee was way off. Btw, I never trust just one device, but if I did, it would be my refracometer (and not a digital one).
Just my two pennies.

Randy said he prefers a conductivity probe over a refractometer lol

 

[vetteguy53081]

Hanna

 

[minus9]

Randy said he prefers a conductivity probe over a refractometer lol

Yeah, but he's a chemist, so it doesn't count.

 

[Nhjmc]

no worries and my bad if I didn’t “word” it properly.

 

[Nhjmc]

I saw those were highly rated but didn’t have much luck finding but also didn’t dig that deep.

 

[Nhjmc]

Yeah, but he's a chemist, so it doesn't count.

I actually tried/wanted to pm him for advice on another issue but couldn’t

 

[Nhjmc]

Thank you for the info I’ll research what that means, and glad I asked . I am new to hobby and wasn’t aware of this. Been looking into purchasing a digital salinity tester/checker (quite a few articles on topic that I’ve read stated they are the best of the best to check salinity level).

 

[ReefLab]

Thank you for the info I’ll research what that means, and glad I asked . I am new to hobby and wasn’t aware of this. Been looking into purchasing a digital salinity tester/checker (quite a few articles on topic that I’ve read stated they are the best of the best to check salinity level).

No worries. its always good to ask!

There are three ways to measure: Hydrometers, Refractometers and Conductivity.
I've never personally used a hydrometer but they have the reputation of being inaccurate (not all think this is true)
Refractometers measure how much light "bends" through the water. Likely the most popular method in the hobby.
Conductivity measures, well, how conductive the saltwater is. Conductivity is the method researchers use.

For me, conductivity is just so easy. drop the probe in and take the reading. no having to "zero" meters (like the Milwaukee) no constant recalibration (like regular refractometers).
The hanna has mixed reviews which is why I personally got the pinpoint probe.

 

[Crabby48]

No worries. its always good to ask!

There are three ways to measure: Hydrometers, Refractometers and Conductivity.
I've never personally used a hydrometer but they have the reputation of being inaccurate (not all think this is true)
Refractometers measure how much light "bends" through the water. Likely the most popular method in the hobby.
Conductivity measures, well, how conductive the saltwater is. Conductivity is the method researchers use.

For me, conductivity is just so easy. drop the probe in and take the reading. no having to "zero" meters (like the Milwaukee) no constant recalibration (like regular refractometers).
The hanna has mixed reviews which is why I personally got the pinpoint probe.

love my Hannabecause it’s quick and easy. It reds low to refractometers but is consistent. I keep water 33.5 using Hanna and apex and it’s 35 with refractometer. Don’t know what is correct but know I’m safe.
Its all a mystery lol

 

[chipmunkofdoom2]

Skip the refractometer and go with a conductivity meter. Measuring how current travels through a sample feels a lot more fit for ourpurposes than measuring how light travels through a sample. I have the American Marine salinity monitor and it's great.

I'd also avoid the pen-style conductivity meters. The reviews seem to be mixed at best. Some have almost exclusively negative reviews (the IceCap salinity tester as an example).