HELP - Going on vacation and Profilux 4 lost wifi connection

  • Thread starter Thread starter VJV
  • Start date Start date
  • Tagged users None
Neptune
Jump to Last
You need to have the P4 connected to USB.

1 - download from https://www.aquariumcomputer.com/downloads/wifi-module-esp-update/
2 - Unzip folder and open unzip folder
3 - Select and open the WiFi_FirmwareUpdateTool.exe
4 - Open port number of your P4
5 - Run the "Reprogram File System"

Make sure to backup your settings first.
 
Nutramar Foods
Deltec
VJV said:
Done. What do I do now? Press Start to update the wifi firmware?
Click to expand...

The reprogram is doing both if I remember, so no need to press start again.
Just restart the P4 and connect and check for the Wifi version, you should be now on 7078.
You may need to enter again your Wifi information due update of spiffs file.
 
kodo28 said:
The reprogram is doing both if I remember, so no need to press start again.
Just restart the P4 and connect and check for the Wifi version, you should be now on 7078.
You may need to enter again your Wifi information due update of spiffs file.
Click to expand...
Well, I did the Start anyway and although no error message popped up a prompt window opened. However, When it finished nothing happened. I disconnected the P4, waited about 10 seconds and reconnected it again and... still in the old firmware version.
 
WWC
VJV said:
Well, I did the Start anyway and although no error message popped up a prompt window opened. However, When it finished nothing happened. I disconnected the P4, waited about 10 seconds and reconnected it again and... still in the old firmware version.
Click to expand...
Did you close GCC and reopen it ?
If you are using the right file and update went ok you should see Module firmware 7078

1565389290924.png
 
YES!!!! Did the update again, waited 30 seconds for the power recycle and now the firmware has been updated!
 
Now I need to try to create a new WIFI connection... fingers crossed
 
Tidal Gardens
Well, it was too good to be true... ;Inpain... still no connection...

Everything seems ok, but when I try to ping the P4 instead of the reply that it appears in the GHL wifi setup video (Static IP) I get for times the reply "Destination host unreachable"although in the end it does say that there were 4 packets sent and 4 received, none lost...???
 
VJV said:
Well, it was too good to be true... ;Inpain... still no connection...

Everything seems ok, but when I try to ping the P4 instead of the reply that it appears in the GHL wifi setup video (Static IP) I get for times the reply "Destination host unreachable"although in the end it does say that there were 4 packets sent and 4 received, none lost...???
Click to expand...

Can you post a picture of your wifi settings.
Which status has the green Wifi led light on P4
Are you sure the IP addressed to P4 is not assigned to any other device.
Can you see the P4 IP address on your router ( connected devices )
 
I keep thinking that the fact that both the 2,4GHz and 5.0GHz networks use the same password could have something to do with this...?
 
kodo28 said:
Can you post a picture of your wifi settings.
Which status has the green Wifi led light on P4
Are you sure the IP addressed to P4 is not assigned to any other device.
Can you see the P4 IP address on your router ( connected devices )
Click to expand...
Will post a picture in a second.
The Green WIFI led on the P4 is solid green
I can, although it does say that it is connected to the 5Ghz network when in fact I used the SSID of the 2,4GHz (they are both the same but the the 5GHz one ends with a "-5"
 
VJV said:
I keep thinking that the fact that both the 2,4GHz and 5.0GHz networks use the same password could have something to do with this...?
Click to expand...
No it shouldn't be a problem. I do have a router with both networks and same password for both.

Even more my PC is connected to the 5Ghz net using GCC over Wifi and P4 is registered on the 2.4ghz ;)
 
Tidal Gardens
kodo28 said:
No it shouldn't be a problem. I do have a router with both networks and same password for both.

Even more my PC is connected to the 5Ghz net using GCC over Wifi and P4 is registered on the 2.4ghz ;)
Click to expand...

Well, then I am put of ideas... this is what I get when I ping the P4 address:
 
VJV said:
ced9d493382fd768b3ffab276208259e.jpg
Click to expand...

Ok, do you see the IP address 192.168.1.30 assigned to the P4 in your router configuration ?
You should have some kind of view where you can check for all the network connected deviced in your router.
 
Top Shelf Aquatics
kodo28 said:
Ok, do you see the IP address 192.168.1.30 assigned to the P4 in your router configuration ?
You should have some kind of view where you can check for all the network connected deviced in your router.
Click to expand...

Yes, I do see this connection although it is not called “Profilux4”, but rather a string of numbers capital letters and dots...
 
Neptune

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Deltec
TCK Corals
Dinkins Aquatic Gardens
Chewy.com
Nutramar Foods
Top Shelf Aquatics
Tidal Gardens
World Wide Corals
New Posts
Back
Top