Help hooking up BRS RODI

[Mr.Asbury]

Hello!

I am attaching pictures of my sinks at work to this. Does anyone know what adapter I need to get in order to hook this to my BRS 5 Stage?

 

[Matthew Frost]

The 5 stage kit includes what you need. You just need to unscrew the tapered end of your spout and screw on the adapter included with the kit. You will then have to unscrew the fitting on the side of the adapter. Place that barrel nut over you water supply tube for the RODI unit. Then there will be a compression fitting that goes over the supply line. Put the supply line back on the faucet adapter and screw the barrel nut down tight and your ready to go.

 

[siggy]

can you have maintenance put a "Tee" in the supply in the cabinet under the sink and do a permanent installation. That way you can maybe fit a 5 gallon collection container that is always ready.

 

[Retro Reefer]

There are many ways to do it.. you may try one of these on your faucet from BRS, or just tap into a cold water line with a saddle adapter shown below

 

[Mr.Asbury]

Thanks guys. The school added a "T" into the line. The main spigot had an adapter for the high pressure head that was soldered in.