Areeflover
Well-Known Member
I need help I cant figure out how to connect my Neptune cor-15 to my 1" plumbing this is ridiculous
Help! With Neptune Systems Cor-15
- Thread starter Areeflover
- Start date
- Tagged users None
OP
OP
Areeflover
Well-Known Member
I appreciate the feed back but that doesn't help my situation
11cmortarman
Active Member
hard plumbed or soft tubing?
Ebslinger
Active Member
you could use something like a "Schedule 80 Reducing Bushing 1” Spigot x 3⁄4” Slip" to reduce your 1 inch pipe in to the 3/4 inch output size of the cor 15. you will still need a short piece of 3/4 inch pipe for the pumps output.
DC504
Community Member
To go 1", probably the easiest way would be to use the included 1.25" union and reduce. If you don't use the union, you'll have to go from 3/4" to 1". I'm also starting my my plumbing and using a COR.
Something like this:
https://www.homedepot.com/p/DURA-1-1-4-in-x-1-in-Schedule-40-PVC-Reducer-Bushing-C437-168/100347284
Something like this:
https://www.homedepot.com/p/DURA-1-1-4-in-x-1-in-Schedule-40-PVC-Reducer-Bushing-C437-168/100347284
11cmortarman
Active Member
I used a 1 1/4 schedule 80 reducer to 1 inch and utilized the 1 1/4" Slip to BSPP Union the pump came with. I used a slip spigot fitting on that to use tubing.
OP
OP
Areeflover
Well-Known Member
Soft into hard
OP
OP
Areeflover
Well-Known Member
So the tricky part with mine is it's an existing tank and I can't use the old return cause its a ticking time bomb so whatever I do I can't glue anything at least that touches water
OP
OP
Areeflover
Well-Known Member
This is my plumbing currently
Ebslinger
Active Member
We're going to need a bigger boat...
Sorry to say, you will likely need to do a major re-plumb. If you do it in soft tubing, there won't be any glue to worry about, and the curves will be simple.
Sorry to say, you will likely need to do a major re-plumb. If you do it in soft tubing, there won't be any glue to worry about, and the curves will be simple.
OP
OP
Areeflover
Well-Known Member
I don't mind doing it completely soft I just have no idea how to do that without glue
11cmortarman
Active Member
You dont happen to have a jebao pump do you. The one inch spigot adapter that came with my old jebao dc pump fit perfectly with the small collar the cor 15 came with. I used it that way until i ordered parts from brs
OP
OP
Areeflover
Well-Known Member
Actually yes I do that's what I was using
11cmortarman
Active Member
Thats the jebao 1 inch spigot piece
Ebslinger
Active Member
Ok, let me make sure I understand this. You have a new Cor-15 pump that you want to plumb into your system.
You have some existing plumping that is 1 inch.
Question: How does the existing plumbing feed back into the tank? Is that white pvc 40 feeding bulkheads?
You have some existing plumping that is 1 inch.
Question: How does the existing plumbing feed back into the tank? Is that white pvc 40 feeding bulkheads?
OP
OP
Areeflover
Well-Known Member
Yes it is
OP
OP
Areeflover
Well-Known Member
Holy crap I need to find thatThats the jebao 1 inch spigot piece
