Help with Red Sea E260 w/sump

[Zachary Roy]

I got it, I know what I can do! I came across a modification on the return nozzles to turn them into line loc line which in turn I can adjust the return height so I siphone less water.

 

[lancesmith1]

there are holes/slots in the ball of the nozzle where the water comes in as well. It is not only thru the hole in the nozzle.

 

[Zachary Roy]

there are holes/slots in the ball of the nozzle where the water comes in as well. It is not only thru the hole in the nozzle.

Dang, so neither of those 2 would work.

 

[Zachary Roy]

I just disassembled one of the circulation heads and there are no pass throughs and its sealed with a gasket to make it watertight.

 

[Zachary Roy]

Alright, that's not going to work either. The 2 pass through ports below the 2 x circulation returns is causing the water to equalize in the rear sump. With my sump completely full (not overflowing obviously) I can get the water line in the rear sump just under the emergency drain.

Not sure where to go from here other than try and stabilize it where it's at now. Thanks for the help!