Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
FYI, this thread is several years old. 
High alkalinity
- Thread starter Muney Mun
- Start date
- Tagged users None
donnievaz
Well-Known Member
FYI, this thread is several years old.
Randy,
I'm watching a friends system while he's out of town. His Alk is through the roof, it's well over 14dkh. I'm not sure how it got that way but it is and it's not coming down. His system is around 600 gallons according to him. Multiple tanks and sumps all tied together. Anyway I'm trying to get a handle on it, some sps are bleaching. He started dosing Aquaforest 123 right before he left, I turned off component 2 (alk) about 4 days ago but it's still above the limit of the Red Sea test kit. I have no clue what he did to get it that high to begin with. He's a little scatterbrained. I suspect he's been randomly dosing all kinds of stuff with no rhyme or reason. Should I attempt to bring it down with muriatic acid? If so, how fast/slow should I go?
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
First, I'd use a second syringe of titrant to see exactly how high the alk is.
Make sure there are enough nutrients in the system to prevent ULNS. Feed more if needed.
Algae is temporary.
Make sure there are enough nutrients in the system to prevent ULNS. Feed more if needed.
Algae is temporary.
donnievaz
Well-Known Member
I did fill the syringe again, it's a total of 1.2ml to the color change. I don't know what that equates to but I'm guessing it's up around 16 or so. I'll tell his wife to start feeding heavy.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
I don't have the chart handy.
Just add the values for the two syringes together.
Just add the values for the two syringes together.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
Yes, that's the right calculation. I'd probably monitor it rather than add acid as that drops pH hugely and is easy to overshoot.
But if you do it slowly and carefully, it will solve the problem (assuming the kit is accurate).
But if you do it slowly and carefully, it will solve the problem (assuming the kit is accurate).
donnievaz
Well-Known Member
Yes, that's the right calculation. I'd probably monitor it rather than add acid as that drops pH hugely and is easy to overshoot.
But if you do it slowly and carefully, it will solve the problem (assuming the kit is accurate).
Yes, that's the right calculation. I'd probably monitor it rather than add acid as that drops pH hugely and is easy to overshoot.
But if you do it slowly and carefully, it will solve the problem (assuming the kit is accurate).
I'll wait and see. It should be accurate, I used his kit first, then mine to verify his because I didn't believe it.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
You can also use hobby products like Seachem acid buffer, but the pH drop per unit of alk drop is the same.
