High-Power LED fixture: New Mitras LX7 series

[Matthias Gross]

Hi,

the release of the Mitras LX7 is just around the corner - now accepting pre-orders.
Don't miss the pre-order special, valid until 11/13/2016!

Read more in our blog here:
https://www.aquariumcomputer.com/the-new-mitras-lx7-series/

Further details will be anounced during next week!

 

[revhtree Verified Admin]

Nice light!

 

[Dumaurier7]

Can these be used inside a canopy ?

 

[Matthias Gross]

The Mitras LX7 are designed for "open" aquariums, too high or even condensing humidity or dripping water from above are not allowed

use in a canopy is possible as long as these conditions are met

for tanks with canopies we have our Mitras Lightbar - similar LEDs/driver/dimming features, but water proof IP67:
https://www.aquariumcomputer.com/products/ghl-illumination/mitras-lightbar-2/

 

[chema]

Hi Matthias: concerning LEDs, the only difference between the new LX7 and the LX6 are the new 385 nm LEDs, or there are other differences?

Thanks

 

[Matthias Gross]

We just published the details on our website, at the moment we have only the German version, but the English version will be done by Thursday latest.

But I think you will find all important information about spectrum, LEDs, PAR performance etc. already here
https://www.aquariumcomputer.com/de/produkte/ghl-beleuchtung/mitras-lx-7000-series/

even when it is German.

I will announce here when English version has been published.

 

[Matthias Gross]

Now in our US web shop!

https://www.aquariumcomputer.com/usa/product-category/mitras-led-illumination/mitras-lx7/

Pre-oder price $699.90 until 11/13/2016!

After that regular price $749.90.

 

[Dumaurier7]

The Mitras LX7 are designed for "open" aquariums, too high or even condensing humidity or dripping water from above are not allowed

use in a canopy is possible as long as these conditions are met

for tanks with canopies we have our Mitras Lightbar - similar LEDs/driver/dimming features, but water proof IP67:
https://www.aquariumcomputer.com/products/ghl-illumination/mitras-lightbar-2/

No moisture present , but it does get a bit warm ! although the fixtures do employ active cooling would this be an issue ? I will also be installing some in cabinet cooling fans to help mitigate against this issue.

 

[Matthias Gross]

I don't think this is a temperature issue here. Of course the fixture performance will be reduced (the warmer the worse the efficiency), but the light will still work even when it is warm under the canopy.

Sometimes it happens that water condenses at the inner side of a canopy and this water drips from there onto the fixture - this can destroy the light over the time - as most other lights which are designed for aquariums without canopy.

 

[Matthias Gross]

... and here the link to our new Mitras LX7 web page with all details - just completed!

https://www.aquariumcomputer.com/products/ghl-illumination/mitras-lx-7000-series/

 

[Matthias Gross]

Mitras LX7 now available with pre-order discount in these shops:

USA: https://www.aquariumcomputer.com/usa/shop/

all other regions: https://store.aquariumcomputer.com/en-GB/products-shop/light-technology/led-pendant-lamp-mitras

and at all participating shops

 

[Dumaurier7]

Hi! My tank is 96'Lx24"w x 32"H how many lights would I need ?

 

[Matthias Gross]

Hi, it depends if you have many corals which need much light and hwo you arranged them

I think 3 lights would be fine in most case - if it turns out that your tank demands even more light you could ad a 4th unit later

see also the technical data and specs here:
https://www.aquariumcomputer.com/products/ghl-illumination/mitras-lx-7000-series/

 

[Jerel]

Will the LX7 still require the PLM-PWC card to enable communication with a ProfiLux 3 or 4?

 

[Vinny@GHLUSA Verified Sponsor]

Yes, the PLM-PWC card will be needed for the ProfiLux to wirelessly transmit data to the LX 7 fixture.